25W Single Output Switching Power Supply, SMPS *High efficiency,low cost SMPS *professional switching power supply manufacture

25W Single Output Switching Power Supply

SPECIFICATIONS       INPUT   Voltage Range 85~264 VAC 47~63 Hz;120~370VDC AC Current 0.6 A/115 V0.35A/ 230 V Efficiency 72%/115VAC(SKS-25-5);    76%/115VAC(SKS-25-12);    77%/115VAC(SKS-25-15);     80%/115VAC(SKS-25-24); Inrush Current Cold start 15A/115V30A/230V Leakage Current smaller than 0.75 mA/240VAC     OUTPUT See Datasheet     PROTECTION   Over Load 110%~160%   Protection type: Fold back current limiting, recovers automatically after fault condition is removed. Over Voltage 115%~135%   Protection type: hiccup mode, recovers automatically after fault condition is removed.     ENVIRONMENT   Working Temp., Humidity -10°C~+60°C;20%~90 %RH Storage Temp., Humidity -20°C~+85°C;10%~95 %RH Vibration 10~500Hz,2G 10min./1cycle, period for 60min, X, Y, Z each along axes     SAFETY   Withstand Voltage I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC     STANDARD   Safety Standard Design refer to UL1012, TUVEN60950 EMC Standard Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5;ENV50204,EN55024     OTHERS   Weight 0.39Kg Packing 45pcs/18Kg/0.9CUFT     NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.   2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ   parallel capacitor.   3.Each output can within current range. But total output power can’t exceed rated load.   4.The power supply is considered a component which will be installed into a final equipment. The final equipment must    be re-confirmed that it still meets EMC directives.     OUTPUT

Model LS-25-5 LS-25-12 LS-25-15 LS-25-24 DC Voltage 5V 12V 15V 24V Voltage Tolerance ±2% ±1% ±1% ±1% Rated Current 5A 2.1A 1.7A 1.1A Current Range 0-5A 0-2.1A 0-1.7A 0-1.1A Rated Power 25W 25.2W 25.5W 26.4W Ripple & Noise 50 mVp-p 100 mVp-p 100 mVp-p 100 mVp-p DC Adjustment Range -5%, +10% ±10% ±10% ±10% Setup,Rise,Hold Time 800ms,50ms,10ms/115VAC300ms,50ms,80ms/230VAC at full load

25W Single Output Switching Power Supply