SPECIFICATIONS | |
| |
INPUT | |
Voltage Range | 85~132 VAC / 170~264 VAC47~63 Hz;selected by switch 240~370VDC |
AC Current | 0.5 A/115 V 0.25A/ 230 V |
Efficiency | 65%(LS-15-5); 68%(LS-15-12); 72%(LS-15-24); |
Inrush Current | Cold start 15A/115VAC 30A/230VAC |
Leakage Current | smaller than 0.5 mA/240VAC |
| |
OUTPUT | See Datasheet |
| |
PROTECTION | |
Over Load | 110%~160% |
| Protection type: Fold back current limiting, recovers automatically after fault condition is removed |
| |
ENVIRONMENT | |
Working Temp., Humidity | -10°C~+60°C;20%~90 %RH |
Storage Temp., Humidity | -20°C~+85°C;10%~95 %RH |
Vibration | 10~500Hz,2G 10min./1cycl, period for 60 min, each along X, Y, Z, axes |
| |
SAFETY | |
Withstand Voltage | I/P-O/P: 1.5KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| |
STANDARD | |
Safety Standard | Design refer to UL1012 |
EMC Standard | Design refer to FCC Part15 J Conduction Class B |
| |
OTHERS | |
Weight | 0.31Kg |
Packing | 45pcs/15Kg/0.9CUFT |
| |
NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
| 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ &47μ parallel capacitor. |
| 3.Tolerance: includes set up tolerance, line regulation and load regulation |
| |
OUTPUT | |