Ads by Google
15W Single Output Switching Power Supply S-15 Series
Features:
AC input range selected by switchProtections:Short circuit/Over loadCooling by free air convection100% full load burn-inFixed switching frequency at 37KHzLost costHigh reliability1 year warrantyS-15 SPECIFICATION:
| MODEL | S-15-5 | S-15-12 | S-15-24 |
| DC VOLTAGE | 5V | 12V | 24V |
| RATED CURRENT | 3A | 1.3A | 0.7A |
| CURRENT RANGE | 0 ~ 3A | 0 ~ 1.3A | 0 ~ 0.7A |
| RATED POWER | 15W | 15.6W | 16.8W |
| RIPPLE & NOISE (max.) Note.2 | 50mVp-p | 50mVp-p | 100mVp-p |
| VOLTAGE ADJ. RANGE | 4.75 ~ 5.5V | 10.8 ~ 13.2V | 21.6 ~ 26.4V |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% |
| LOAD REGULATION | ±1.0% | ±0.5% | ±0.5% |
| SETUP, RISE, HOLD TIME | 200ms, 100ms, 30ms at full load | ||
| VOLTAGE RANGE | 85 ~ 132VAC / 170 ~ 264VAC selected by switch 240 ~ 370VDC | ||
| FREQUENCY RANGE | 47 ~ 63Hz | ||
| EFFICIENCY (Typ.) | 65% | 68% | 72% |
| AC CURRENT | 0.5A/115VAC 0.25A/230VAC | ||
| INRUSH CURRENT (max.) | COLD START 15A/115VAC 30A/230VAC | ||
| LEAKAGE CURRENT | <0.5mA/240VAC | ||
| OVERLOAD | 105 ~ 135% rated output power | ||
| Protection type : Constant current limiting, recovers automatically after fault condition is reoved | |||
| WORKING TEMP. | -10 ~ +60ºC (Refer to output load derating curve) | ||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||
| STORAGE TEMP., HUMIDITY | -20 ~ +85ºC ,10 ~ 95% RH | ||
| TEMP. COEFFICIENT | ±0.02%/ºC (0 ~ 50ºC) | ||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | ||
| SAFETY STANDARDS | Design refer to UL1012 | ||
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | ||
| EMI CONDUCTION & RADIATION | Design refer to FCC Part15 J Conduction Class B | ||
| MTBF | 522.1K hrs min. MIL-HDBK-217F (25ºC) | ||
| DIMENSION | 99*97*36mm (L*W*H) | ||
| PACKING | 0.30Kg; 60pcs/19.84Kg/0.0326CBM | ||
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation. | |||