1. 100m control distance 2. Widely used for lights 3. press on, press again off. 4. 2 remotes with key chain 5. DC powered

Feature:

Wireless control, easy to installControl Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.With characteristics of reverse power protection and over current protectionAudible / visual indicationUse microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.One/several transmitters can control one/several receivers simultaneously.If you use two or more receivers in the same place, you can set them with different codes.Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No.: S2T-DC09-ANT1 / S2T-DC12-ANT1 / S2T-DC24-ANT1Channel: 2 CHControl Mode: Toggle (Press -> On; Press again -> Off)Coding Type: Fixed codeCoding Setting: By solderingPower Supply (Operating Voltage): DC12V±1V (S2T-DC12-ANT1), DC9V±1V (S2T-DC09-ANT1), DC24V±1V (S2T-DC24-ANT1)Working Voltage Range of Relay: AC110~240V or DC0~28VPCB Size: 68mm x 48mm x 20mmCase Size: 75mm x 55mm x 30mmMaximum Working Current: 10A / each channelLength of External Telescopic Antenna: 80mm / 305mm (stretch)The receiver has farther working range with external telescopic antenna!

Transmitter:

Model No.: C-2Channel: 2 CHRemote Control Distance: 100m / 300ft (theoretically)Encode: Fixed code by solderingUnit size: 58mm x 39mm x 16mmPower Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Initial state: A, B = Normally Closed; B, C = Normally Open.1) Press button 1: Turn on relay 1 (connect B and C, disconnect A and B)2) Press button 1 again: Turn off relay 1 (disconnect B and C, connect A and B)3) Press button 2: Turn on relay 2 (connect B and C, disconnect A and B)4) Press button 2 again: Turn off relay 2 (disconnect B and C, connect A and B)

Package Include:

1 x Receiver: S2T-DC09-ANT1 / S2T-DC12-ANT1 / S2T-DC24-ANT1 (2 Channel / Toggle Control Mode)2 x Transmitter: C-21 x User manual