1.100m of control distance 2.Toggle control mode 3.Control Lights,Motors,Fans,Cameras,Doors,Locks, Windows, Alarm, Car, etc

  

Feature:

Wireless control, easy to install. Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. The receiver has farther working range with external telescopic antenna,about 100 meters!Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code. One/several transmitters can control one/several receivers simultaneously. If you use two or more receivers in the same place, you can set them with different codes.

Receiver:

Model No.: S1T-DC09 / S1T-DC12 / S1T-DC24 Channel: 1 CH Control Mode: Toggle (Press -> On; Press again -> Off) Decode: Fixed code by Soldering Power Supply (Operating Voltage): DC12V±1V (S1T-DC12), DC9V±1V (S1T-DC09), DC24V±1V (S1T-DC24) Working Voltage Range of Relay: AC110~240V or DC0~28V PCB size: 68mm x 48mm x 20mm Case size: 75mm x 55mm x 30mm Maximum Working Current: 5A / each channel

Transmitter:

Model No.: C-1 Channel: 1 CH Remote Control Distance: 100m / 300ft (theoretically) Encode: Fixed code by soldering Unit size: 58mm x 39mm x 16mm Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

 Usage:

Initial state: B, D = Normally Closed; D, K = Normally Open. Press button: Turn on relay (connect D and K, disconnect B and D) Press button again: Turn off relay (disconnect D and K, connect B and D)

Note:

If you need longer range, we can offer you the other series of remote control, such as CV Serie ( 500m / 1500ft ), CB Serie (1000m/3000ft); Or you can replace the internal rolling antenna with the external extend antenna on the receiver for improve the range.