rollers for hot continuous rolling mills,China rollers for hot continuous rolling mills Manufacturers, Suppliers

Pusher Type Bright Anealing Furnace for Copper Coil

Aug 09, 2012

... furnaceThis furnace design has proved itself as being particularly suited for the continuous treatment of parts under a protective gas atmosphere. The ... °C7Max. Load Capacity192.58Nos. of Lifting Rollers in front of the furnace24 Pcs9Nos. of Convey Rollers in front of the furnace31 Pcs10Nos ...

Supplier: Nanjing Nianda Furnace Science and Technology Co., Ltd.

[China Manufacturers]

Protape for Straightening

Jun 12, 2012

Protape for Straightening strong hardwearing and low friction; with release liner; ... used in application. The tapes could easily clings to the hot rollers for protecting form acid, alkali, and stains, etc. Being ... wrapping of cable. Being used in sealing of the hot plastic parts. Straitening with temperature over 200 may damage ... through your hair and evenly straightening it Protape for Straightening

Supplier: Ningbo Dengfeng Synthetic Materials Co., Ltd.

[China Manufacturers]

750mm 4-stand tandem cold rolling mill

Jun 10, 2012

750mm 4-stand tandem cold rolling mill is a 4 stands continuous rolling machinery to process coils from 2.75mm downto 0.4mm ... 750mm 4-stand tandem cold rolling mill is an equipment that uncoils, straightens, cold rolls the hot rolled and pickled steel strip ... Rapid roller exchanging and so on. .Product Specification Low Material Hot roll steel coil pickled and edge trimmedMaterial TypeLow carbon steel ...

Supplier: Shanghai Jingxiang Industrial Co., Ltd.

[China Manufacturers]

Fast shipping energy saving disc pelleter for the concrete

Dec 23, 2012

... industry, infrastructure and mechanization of casting workshop, It can provide continuous even and quantitative feeding granular materials .Working principle:1.Raw ... in the ball is spelt out of the surface in continuous rolling process. Because of the bonding and the natural volatile, the ... .55100Zl3636006006.111.3153-56500 Fast shipping energy saving disc pelleter for the concrete

Supplier: Zhengzhou Keda Machinery Equipment Co., Ltd.

[China Manufacturers]

Mesh Belt Continuous High Temperature Carburizing Furnace

Mar 17, 2013

... carbon fibers Introduction The equipment is mainly used for the continuous high temperature carbonization of pre-oxidized fiber, non ... , cooling system, air distribution system, electrical control system, rolling system etc. The equipment is controlled automatically, with an ... automatic rolling device and belt deviation calibration device. The inlet ...

Supplier: Advanced Corporation For Materials & Equipments

[China Manufacturers]

Colored Hot Ink Roller

Jan 13, 2013

... , Hot Melt Ink Roll, Hot Ink Roller, hot solid ink roller, hot ink rolls, hot ink roller, dry ink rolls, hot melt ink rollersDiscription1. Our Ink Rollers ... of Hot Ink Contact coders such as Markem, Norwood, FRM-980(China), MY380(China) etc.3. Our Ink Rollers are suitable for printing ... and preheat.In order to supply you the proper ink rollers for the coding machine now you are using, please inform us ...

Supplier: Jiaozuo Zhuoli Stamping Material Co., Ltd.

[China Manufacturers]

Electric PET blow moulding machine (EB-L3 electric PET blow molding machine, 2100BPH for 5L water bottle)

Mar 31, 2013

... latest version.* Preform loading systemThanks to a continuous preform loading system which is the same ... and cross ventilation systems prevent crystallization, even for very thick perform walls. * Variable pitch ... , we have developed an air cooling system for hot fill PET bottles, after high pressure blowing, ... top of the machine for saving space. 2. Preform loading is continuous with high speed (the ...

Supplier: Taizhou Mega Machinery Mould Co., Ltd.

[China Manufacturers]

HB Series Double Side Full-auto Self-peeling film hot laminator

Mar 09, 2012

... itself # photocell eye for protecting the roller Cabinet Frame Full-auto Self-peeling and Dual Rollers Heated Model. Support Roll ... hot and cold laminating, with infrared heaters in upper and lower rollers.43", 51", 63", 67", 81", 91" Maximum working film width for ... in rolls continously (Double side).High release silicone rollers - for easy cleaning.Equipped with optical sensor and emergency stops ...

Supplier: Beijing Signs Full Joint Technology Co., Ltd.

[China Manufacturers]

hot-rolled aluminium strips /coils /rolls

Oct 26, 2012

... in recent 10 years. It adopted proven, advanced aluminium strip hot rolling technique in the world of today. This is a giant ... line has filled a vacancy that there's no hot tandem rolling technology in Chinas aluminium fabrication industry. It makes tremendous ... aluminium fabrication facilities and technology. The 1+4 hot mills has a maximum rolling speed up to 450m/min with annual production capacity ...

Supplier: Shenzhen Lumtop Ind Dev Ltd.

[China Manufacturers]

Quarry Equipment Rollers

May 05, 2012

... at supply all kinds quarry equipment rollers, Supply Powerscreen stand rollers, Terex rollers.High quality rollers protect the conveyor belt from wearing ... choice, precision cold-drawn shaft.All above make GH rollers as your reliable choice.We never encourage client find cheaper ... conveyor and overland conveyor.We would use different greast for hot wet invirment and cold dry invirment. Any way, we ...

Supplier: Xuzhou Guanghuan Conveyer Idlers Co., Ltd.

[China Manufacturers]

Prime DIN St37 Hot Rolled steel plate per piece

Sep 27, 2012

... . Place of origin: Hebei, China(Mainland)5. Technique: hot rolled6. Surface Treatment: coated7. Application: ship plate, boiler ... Z25, Z35 are available for various grades.Delivery States: Heat treatment facilities for hot-rolled, controlled rolling, normalizing, annealing, tempering, ... Macrostructure, detection of defects, Hardness and DWTT test for pipelines steel plates are also available. We also ...

Supplier: Qingdao Hengcheng Steel Co., Ltd.

[China Manufacturers]

C and Z Channel Rolling Machine

Jan 26, 2013

... MachineC/Z quick interchangeable machine adopts a special structure. The rollers for C & Z are changed very quickly without dismantle any parts ... :one stepRectifying:one stepForming variety:C&Z Purlin sectionsType steel for rollers:GCr15, quenchedRoll mould material:Gcr15,quenching treatment:HRC58-62°Bearing ... purlins products according to your demands C and Z Channel Rolling Machine

Supplier: Wuxi Yuanding Science And Technology Co., Ltd.

[China Manufacturers]

Rolling machine (3-roller plate rolling machine)

Mar 07, 2013

... BenderMotor-driven and hand-operated asymmetric 3-roll rolling machine is designed especially for metal sheet processing. The upper roller can ... 3-roller motor-operated Plate BenderThe symmetric 3-roll rolling machine features the traditional isosceles triangle structure and is used ... can be either hand operated or motor-driven. Additional rollers for the forming of such profiles as angle iron, round ...

Supplier: Guangzhou Hecheng Tiangong Machine Manufacturing Co., Ltd.

[China Manufacturers]

Steel Deck Floor Forming Machine For Metal Structural Building

Apr 01, 2013

... :Running steadilyThis roll forming machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling ... steel sheet as the raw material, decoiling, continuous rolling and cold-forming, automatically cut to the size and ... and adjusting the speed technology,and it realizes the continuous automatically production, therefore, it is really a new ...

Supplier: Henan Anson Steel Co., Ltd.

[China Manufacturers]

symmetrical manual plate rolling machine

Mar 22, 2013

... --W11 series symmetric plate rolling machine with 3 rollers is a metal forming machine for bending,rounding,rolling coiling metal plate---The very ... high rotation power is a guarantee of the W11’s superior rolling ... roll dia(mm)Upper roller dia(mm)down rollers dia(mm)bottom rollers distance(mm)Motor(kw)Dimension(mm)W11- ...

Supplier: Nantong Burt CNC Machine Co., Ltd.

[China Manufacturers]

rollers, printing machine parts

Feb 03, 2012

... to import and export. Our company has branch factories for forging, casting, heat treatment quenching-and-tempering, ... can manufacture various machining parts and equipments. For rollers, we can do different rollers for plain cast iron roller, centrifugal roller, ... normal steel casting roller, semi-steel roller, normal steel forging roller, hot ...

Supplier: Anshan Ying Yat Trade Co., Ltd.

[China Manufacturers]

Hot Tear Pattern Sheets(Colored Armor Plate,Chequred Steel Plates)

Mar 23, 2013

... 1050mm----1500mm Thickness:2mm-- Chequred Sheet(colored armor plate,hot tear pattern sheets)Wideness: 1050mm-1500mmLength: as required ... ,good in rain and corrosion resistance,suitable to continuous rolling,convenient widely used in construction industry,the application ... Name Shanghai Minghe Metal Co.,Ltd Natureof Material Rebar, Hot rolled Coils/Sheets, Cold rolled Coils/Sheets, Chequred plate ...

Supplier: Shanghai Minghe Metal Co., Ltd.

[China Manufacturers]

Forged / Hot rolled Alloy tool steel bars / square blocks 1.2344 / H13 / 4Cr5MoSiV1 / SKD61 / DIN X40CrMoV5-1 / BH13

Apr 01, 2013

1. Process: EAF+LF+VD+Forging/rolling 2. Certificate: CCS, GL, KR, LR, ISO 3. Delivery time ... ductilityand hardenability. Tools can be water cooled. ApplicationsH13 finds applications for hot die work, die casting and extrusion dies, wear resisting ... .Welding This alloy is weldable. Contact the alloy supplier for information on welding procedures.Production Equipment:Machining:Testing:Shipment:Quality ...

Supplier: Changsha Qilu Import & Export Co., Ltd.

[China Manufacturers]

Hot-dip Galvalume Steel(GL:55% Al-Zn Coated Steel)

Apr 01, 2013

... can be skin passed.3.The specification for thicknesses under 1.6mm for hot-rolled base metal according to JIS G3302 ... Information <-> Customer 8. Multi BrandsAppropriate Products is the best , Steel mills starting point are different, Customers' demand are different, We offer ... multi-brand co-operation, Agent steel mills, Introduce Customers to consult with mill, We offer funds, ...

Supplier: Jiangsu Joinme Steel Co., Ltd.

[China Manufacturers]

50Mn18Cr4WN nonmagnetic retaining ring for wind power

Jun 18, 2012

... with price&technical 50Mn18Cr4WN nonmagnetic retaining ring for wind power1) different slewing bearing forging2) ... Ring Forging ProcessI. Upsetting The ring rolling process begins with the upsetting of the ... PiercingPiercing involves forcing a punch into the hot upset stock displacing metal radially and leaving ... or preform, is now ready for the ring rolling process.V.FormingThe doughnut-shaped preform ...

Supplier: Sichuan Yuanfang Machine Equipment Fabricate Co., Ltd.

[China Manufacturers]