Detailed Product Description1:Roller supporting structure type: guide column2:High speed3:Mitsubishi PLC4:Running steadily
This roll forming machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel sheet as the raw material, decoiling, continuous rolling and cold-forming, automatically cut to the size and specification which is required, and output the finished panels. The equipment adopts PLC control, AC frequency and adjusting the speed technology,
and it realizes the continuous automatically production, therefore, it is really a new type of energy-saving and high-effective producing equipment for steel structure.
Technical Parameters
No | Item | Parameter | Remark | |
1 | Suitable Material | Type | Galvanized steel | |
Width(mm) | 1250 | According to customer's requirement | ||
Thickness(mm) | 0.8-1.2or 0.4-0.7 | According to customer's requirement | ||
Yield Strength(Mpa) | 230-300 | |||
2 | Forming Speed(m/min) | 20 | Not including cutting time | |
3 | Roller Material | No.45 steel | with hard chromized | |
4 | Cutting Model | Hydraulic Cutting | According to customer's requirement | |
5 | Power source | Type | 380V/3PH/50HZ | According to customer's requirement |
Machine Components
No | Name | Quantity | Remarks | |
1 | Decoiler | 1set | Up to customer | |
2 | Main Machine | Pre-cutting Device | 1set | Up to customer |
Feeding Device | 1set | |||
Roll Forming | 1set | Up to customer | ||
Post-cutting | 1set | |||
Hydraulic System | 1set | |||
3 | Electric Control System | 1set | ||
4 | Supporter/Automatic stacker | 1set | Up to customer |
Layout of roof panel roll forming line:
drawing for Profile
component for the machine
Hydraulic Un-coiler
Electronic Control System