battery capacity should not be less than 60ah at 20 hour discharge rate at 1 75 v end voltage,China battery capacity should not be less than 60ah at 20 hour discharge rate at 1 75 v end voltage Manufacturers, Suppliers

Xinxin Chute Feeder From Stock

Feb 19, 2013

... be hoisted on the mineral warehouse discharge hole. Trough bottom plate do reciprocating movement, Jig frequency of chute feeder is 20 ... , as to the viscous minerals, eccentricity should not be less than 30mm.Chute Feeder :Tank width of chute ... less than 500mm.Chute Feeder Technical Parameter:ModelDischarging Hole(W×H)Max. Feeding Size(mm)Bottom Plate reciprocating Frequency(times/Min)Feeding Capacity ...

Supplier: Gongyi Xiaoyi Xinxin Machinery Factory

[China Manufacturers]

6kv/10kv submersible windings

Jan 20, 2013

... /T3953TR standard.4. INSULATION- Insulation thickness average value should not be less than 90% of nominal value.- Eccentricity of insulation in ... -voltage resistance polyolefin as protective sheath.- The protective sheath thickness should conform to standards, thinnest place should not be less 0.05mm than nominal ... min.90°C 28d after ageing max.Elongation at break rateBefore ageing min.90°C 28d after ...

Supplier: Hebei Guoqian Wires Co., Ltd.

[China Manufacturers]

Z2 Crane Electric Motor

May 13, 2012

... cooling and protection type should be chosen to keep the cleaness of the motors;2, the cooling air should not contain acid or allklimaterial ... pluse wave should not be less than 6,the peak ripple wave factor not be over 10% under the rated speed,voltage and load current.Products performance:1, continuous ...

Supplier: Hangzhou Luyang Machinery Co., Ltd.

[China Manufacturers]

swimming pool

Aug 11, 2012

... children's play areas. In the deep water area, depth should not be less than 1.8m, and in the children's play area, the depth ... the sun.Requirements for Facility Packages 1.At the side of the swimming pool there must be male and female changing rooms,showers ... power units. Waterco is an active market player in over 20 countries and sub-regions, including America, Canada, Italy, France, Switzerland ...

Supplier: Nanjing Hanwei Sports Engineering Industry Co., Ltd.

[China Manufacturers]

Mining Under Suction Submersible Water Pump

Mar 30, 2013

... --------------Well use submersible pump300--------------Base No.4. use conditions (1). Voltage 380V, allowable variation ±5%, frequency 50HZ, three-phrase power ... first stage impeller of the pump should be immersed into the the dynamic water level at least 2 m. And theelectric pump ... the botom of the well should not be less than 3 m.(5). The temperature of the water should be within 20°C.(6). In the ...

Supplier: Zhengzhou Shenlong Pump Industry Co., Ltd.

[China Manufacturers]

power cable

Mar 31, 2012

... 5S)THE TEMPERATURE SHOULD NOT EXCEED 160 .3.WHILE INSTALLATION THE AMBIENT TEMPERATURE SHOULD NOT BE LOWER THAN 0,AND THE BENDING RADIUS SHOULD NOT BE LESS THAN 10 TIMES OF ... IS USED IN ELECTRIC TRANSMISSION AND DISTRIBUTION SYSTEM OPERATING AT RATED VOLTAGE 0.6/1,1.8/3,3.6/6,6/10,8 ... .7/10,8.7/15,12/20,21/35,26/35Kv.USING PROPERTY 1.NEEDNT WARM-UP WHILE INSTALLATION THE AMBIENT ...

Supplier: Liaocheng Huida Import & Export Co., Ltd.

[China Manufacturers]

HFO-1234ze (TetraFluoroPropene) refrigerant

Oct 09, 2012

... -1234ze has an ultra-low GWP than HFC-134a and any other known refrigerant. It should be the trend on preventing global ozone ... development of HFO-1234ze by our R&D. It will be not long a period for us to industrialize it all over ... minimum order of quantity is 20 kgs as Sample for your evaluation. The wholesale order quantity should not be less than 1 metric ton. HFO-1234ze (TetraFluoroPropene ...

Supplier: Beijing Yuji Science And Technology Co., Ltd.

[China Manufacturers]

4-wire cast aluminum ultrasonic level sensor

Mar 31, 2013

... should not be less than 80mA.AC85~265V:Only for four-wire system and the remote version series, and the power supply current should not be less than ... Cable fix:PG13.5Beam angle:8° (3db)Detection cylce:1 second Parameter set up:3 induction buttons Material of ... version;Integrated design, installed conveniently;Protected in the excessive voltage and current , protected in the thunder and lightning;The ...

Supplier: Sichuan Vacorda Instruments Manufacturing Co., Ltd.

[China Manufacturers]

SW Temperature controller thermostat \thermocouple wire

Mar 31, 2013

$SW Temperature controller thermostat \thermocouple wire$

... of the temperature range tolerance value of temperature rangeSBWR K ± 1.5 °C -40 °C ~ +375 °C ± ... °C ~ 350 °C 6, output Signal: 4-20 mA, load resistor 250, the transmission line resistance 1007, ... system8, Accuracy:Temperature Transmitter Accuracy class: 0.1 0.2 0.5Display Accuracy class: 2.5 ... should not be less than 50.Any more quesions or demands,please leave message below,we will get back you at ...

Supplier: Nanjing Metran Measurement & Control Instrument Co., Ltd.

[China Manufacturers]

temperature controller a perssure responsed device

Jul 11, 2012

... the refrigerator,cold beverage machine, refrigerating storages. Temperature controller Characteristics:1.When temperature of the sensing buld goes up or down ... radius of bending curvatures for the capillary tube should not be less than 60mm.and the capillary tube should be clamped with straps 300mm apart.l By ...

Supplier: Shanghai Thermostat Factory Co., Ltd.

[China Manufacturers]

Z series medium DC motor

Feb 01, 2012

... cooling and protection type should be chosen to keep the cleaness of the motors;2, the cooling air should not contain acid or allklimaterial ... pluse wave should not be less than 6,the peak ripple wave factor not be over 10% under the rated speed,voltage and load current.Products performance:1, continuous ...

Supplier: Zhangjiagang Panpasi Imp & Exp Co., Ltd.

[China Manufacturers]

Opaque Quartz Glass Tube

May 12, 2012

... .020.1570.012. Physics Properties Purity (Sio2)99.82Density 20 Kg.m3(×103) 2.06-2.148Shock Resistance KG/CM2 ... 5Resistance10 (20) 3. Detailed Specifications and Technology Standards The Out-diameter deviation of the Opaque quartz glass tube should not be over the ... 30Note:1. The tubes, with both end open and one end open, are available. The wall thickness of the dome end, if so, should not be less than ...

Supplier: Linyi Yuhang Lighting Electric Appliance Co., Ltd.

[China Manufacturers]

Copper conductor PVC electrical cable

Jul 23, 2012

Copper conductor PVC electrical cable 1.Voltage:1kV 2.(Cu)/XLPE(PVC)/PVC ... 4.ZMS Cable Copper conductor PVC electrical cable 1) Applications This product is used as hanging cable ... acid and alkali-resistant. Operating featuresa: A.C rated voltage , 0.6/1kVb: long-term operating temp, - ... laying temp of cable should not be less than 0°C,it shall be pre-heated if it is less than the min.laying temp ...

Supplier: Henan Zms Cable Import And Export Co., Ltd.

[China Manufacturers]

High voltage XLPE Insulation and pvc sheath power cable

Mar 31, 2013

... XLPE insulated and PVC sheathed cables are rates at 6/6(10)KV,8.7/10KV,12 ... (cross-linked polyethylene) NO. of cable cross: 1 core(single core),3cores, We provide armored type and ... temperature of cable should not be less than 0°Cc.Max short-circuit temperature is not exceed 250°C,Not more than5 Sec ... -armoured cable ) the rated voltage:low voltage(0.6/1KV) and medium voltage(6/10kv---35KV).*control cable- ...

Supplier: Jiangsu Tianyuan Cable Co., Ltd.

[China Manufacturers]

Aluminum core PVC insulated wire

Jun 23, 2012

... Aluminum core PVC insulated wire (1) Uo/U450,750V and 300/500V (2) Laying temperature should not be less than 0 degrees Product Aluminum core PVC ... Extruded layer of semi-conductive compound3. Insulation PVC rated at 70°c4. Color for core identification Red, yellow and ... there is a risk of mechanical damage, armored cables should be used.Note cable comply with IEC60502 and customer's specification ...

Supplier: Guangxi Yulin Baoju Wire & Cable Co., Ltd.

[China Manufacturers]

copper conductor BV 2.5mm cable wire

Mar 12, 2013

1) Voltage: 300/500V,450/750V, 300/300V 2) Core:1 X 1-240mm2 3) ISO9000 2.5 armoured cable Service Characteristic1.the ... installation the ambient temperature should not be lower than 0°C. 4.The bending radius should not be less than:(D is outer diameter cable)(1) single-core cables:unarmored ...

Supplier: Hebei Hengyuan Electric Wire&Cable Co.,Ltd.

[China Manufacturers]

TRAY FLEXIBLE CONTROL CABLE

Jan 06, 2013

... with shield layer,shall not be less than 6 times of the cable's overall diameter.CONTROL CABLE 1 PVC insulated & sheathed ... cable.2 Applications2.1 Rated voltage U0/U should be 450/750 V~600/1000VU0~Valid value of the voltage between main insulated ... should be at least equal to the nominal voltage of the system. When DC. System is applied; the nominal voltage of this system should not be more than ...

Supplier: Zhengzhou Yifang Cable Co., Ltd.

[China Manufacturers]

Multi-Pair Shield Control Cables for Computers and DCs

Feb 26, 2012

Features: 1) High quality 2) Reasonable prices Structure: Cu core, PE insulation, ... and automatic system of power-generating metallurgy petrol chemistry. Features: 1) Rated voltage: 300 / 500V 2) Max. long time operating temperature: a ... insulated resistance should not be less than 2,500MΩ.km after charging stably for 1min with DC voltage of 500V 7) The circuit should not be interrupted between the ...

Supplier: Shanghai Shenghua Cable Group Co., Ltd.

[China Manufacturers]

ABC Cable

Mar 08, 2013

... fields where the A.C.rated voltage U(Um) is 0.6/1kV.Using feature:1) The max. long-term operating temperature ... :90°C b) HDPE insulated 75°C2) When short circuit (the Max. lasting time is not over 5 seconds), the Max.temperature ... 150°C3) When laying, the temperature should not be lower than -20oC;4) The permitted bend radius should not be less than the diameter of cylinder that had been ...

Supplier: Xingle Group Co., Ltd.

[China Manufacturers]

XLPE Insulation & PVC Sheath Control Cable

Sep 19, 2012

... characteristics and usesThis product is applicable to AC rated voltage 450/750V and below automatic control or monitoring systems, ... oC, non-fixed installation -15 oCd. Cable laying temperature should not be less than 0 oC.e. Cable to allow bending radius: non-sheathed ... SiteKVVCopper Conductor,PVC Insulated and Sheathed Control Cable0.75 1.0 1.5 2.52-16Permanent installation indoors,in cable ...

Supplier: Zhengzhou Yilan Cable Co., Ltd.

[China Manufacturers]