... towel sound-light alarm should be uniform.7. If need hot towel, can open "soft" heating heating switches indicator.8. Adjust the ... and remove:Appearance of faultHappen reasonRemove wayLack of water and alarm indicatorLack of waterInfuse the clean waterLack of towel, and ... alarm indicatorLack of towelLoad the soft wet rollWithout any display control ...
2000W Convector heater Metal /themoplsastic construction thermostatically controlled auto thermal shut off wall mounted 450-500w convector heater Thermostat- Frost control Indicator Lighting-showing heater workingWall-mounted holder and this way up warningHeating Element- Quick HeatingWarning Word-Do Not Cover
... screws, it can adjust illumination direction of LED lighting.With shoe adapter, it can be used to ... bottom for checking the charge capacity of battery,the indicator lighting for charge capacity of battery will be on. ... When all of the indicator lights are on, the charge capacity is full. ... camera or camcorder, turn on the LED video lighting, then you can start picture or video taking ...
Low-battery warning indicator LED operation indicator Easy to installation Approvals: CE and RoHS Main ... warningTest button verifies battery and alarm operationSounding a loud alarm signal of exceeding 85 dB in alarm mode Five-year limited warranty ... Life: >12months Low battery life: >30days Alarm indicator: continuously emitting red light and shounder Alarm sound level: >85dB at 10 feet (3m ...
... circling tuyere is higher than 60°C, high temperature alarm works.b) Fan alarm: when the fans of internal & external circling ... stop working , the fan alarm works.c) Low temperature alarm: when the temperature of internal circling tuyere is ... below -5°C, the low temperature alarm works.When the three alarms work , alarm indicator brights red.1.3 Self Test functionWhen ...
... , wave indication, with maximum, minimum and mean value indication, alarm settings and alarm indicator functions, historical data reading, access, storage, analysis, processing, sorting ...
... . Insert it directly to the socket with AC220V andthe charging indicator lighting. Keep charging about 12 hours.b. When you press the ... button, you can control the flashlight lighting or not.c. When the battery is fully charged, the ...
... the mono-stable delay is ended.B set alarm control (corresponding to the alarm indicator on the surface panel, output producedwhen the ... indicator is bright):(1) When the meter counting value increases to its alarm ... produced.(2) When the meter counting value increases to its alarm value, the contact output is produced and turns off ...
... , blue and whiteLifespan: 10,000 hoursEnvironment friendly, without UV radiationApplications: indicator, lighting for background, auto bulb and LED display
... special reflector with high temperature resistance, more focus beam, further lighting range, more brightness.User's Instructiona. Push the plug perfectly ... in the socket with AC110-220V/ 50Hz and the charging indicator lighting.Keep charging about 12 hours. b. When using , push the ...
... temperature resistance, more focus beam, further lighting range, more brightness. ..................................................................................................................................................... User's ... with AC220V/50HZ and the charging indicator lighting.Keep charging about 15 hours. 2 ... charging hole . Then the charging indicator works . The torchight need to be ...
... port reset3. Extensive status indication. ALARM general alarm indicator, if any failure of equipment, ALARM red lights flash; working status indication ... circuit or overload to protect the port, the corresponding alarm indicator light flashes. It does not affect the other ... of 1 minute; lightning protection circuit has a failure alarm function and insurance management and other security components.8 ...
Component - Switch: switch with 13.2V regulator & LED Indicator for HID Bike-lighting (1' long) Component - Switch: switch with 13.2V regulator & LED ... Indicator for HID Bike-lighting (1' long) The smart switch is designed for HID ... reverse polarity Component - Switch: switch with 13.2V regulator & LED Indicator for HID Bike-lighting (1' long)
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.