Using steps:
1. Turn on the power switch,This should be "normal" control panel display bright lights.
2. According to confirm button can be made 1 wet towel. Click "1" is a digit, each time you press the add 1.
3. According to "10" button is ten digits, each time you press the add 10. most Settings of 50 piece.
4. In the screen can be made according to the number of wet towel, and then click "confirmation" button. Stop making such midway fabric, can press "cancel" button
5. According to the regulator can change the humidity of wet towel humidity. "0", and "9" minimum humidity, need adjustment according to the maximum moisture humidity. According to need humidity can turn knob.
6. "Water", should add sound-light alarm. "But cloth" soft towel sound-light alarm should be uniform.
7. If need hot towel, can open "soft" heating heating switches indicator.
8. Adjust the length adjustment screws, can change, "the length of the wet towel.
Safety precautions:
The power supply voltage should use 220V, 50HZ Single-phase ac voltagePlease use the water accord with international standerd.Soft towel roll, please provide the according to our company's soft towel roll into the specification, should be put off.In determining the machine has been filled with water and soft towel roll again after the boot operation.The first operation, and a wet towel to produce, soft open heating switches.If all the machine malfunction, please relevant professional maintenance and dealers, prohibit to dismantle maintenance.Long-term need not when, please make sure to shut off the power plug, and pull out all water, remove and soft towel roll.Before use, don't be closed panel grabbled tool parts, prevent cause accidental injury.Please don't put any items in the machine, and should be away from fire, water.Prohibit let children open to any part of the machine, prevent accidents.When the shell with pollution, please use the wet towel wipes cleaner, prohibits the use of benzene, XiangJiaoShui or other chemicalsSimple fault and remove:
Appearance of fault | Happen reason | Remove way |
Lack of water and alarm indicator | Lack of water | Infuse the clean water |
Lack of towel, and alarm indicator | Lack of towel | Load the soft wet roll |
Without any display control panel | Unplug loose, fuse, the power switch | Tight plug, replacing the fuse, turn on the power switch |
Wet too dry or too wet | Dabble too big or too small | Adjust wet button |
Don’t out wet towel | Clip wet towel | Open top cover, throw a wrench, let blade cloth card or sword plate, pull out soft towel, cut off part, will not go back into the soft towel, shut off the power off five seconds to boot. |
technical parameters:
electric tension:220V,50HZ Single-phase ac voltagebest high power:360W(bide one’s time5W)watet box volume:1.6Lwet width:120mmwet length:200-240mmMaking towel speed: 25 / min