Demark 32 cavities pet preform injection system for pet preform mould,the cooling robot with 3 stations, 10000pcs/h, 2040g, 280T

Demark 32 cavities pet preform injection molding machine uses a new part cooling and handling system, which features:    1.  Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface    2.  Optimized cycle utilization being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.Demark pet preform injection molding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 96 cavities.Demark pet injection systems offer:    1.  Faster cycles    2.  Reduced energy consumption    3.  Smaller footprint     4.  Improved repeatability     5.  Rapid set-up

Features:    1.  Two state plasticizing enables plenty injection quantity;    2.  Take out plate with three working position insures sufficient cooling time and shorter cycle time;    3.  High quality parts and accessories from world famous brands enable higher speed and precision;    4.  Special screw design increases torque while brings down shear force to avoid degradation;    5.  Accumulator from world reputable manufacture increases performance while brings down power consumption; Reflex PlatensReflex platens distribute clamp force evenly across the platen face.Reflex platens:    1.  Allow for 10-30% lower clamp tonnage     2.  Decrease mold wear     3.  Improve part quality Injection Unitsdemark systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications. Polaris ControlsPC-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:    1.  Faster cycle times     2.  Improved shot-to-shot repeatability     3.  Remote connectivity through ServiceNetLink     4.  Control of molding system and auxiliaries from a single interface  Linear BearingsLinear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.

Technical Parameter:

ITEM		UNIT	DMK-PET32
INJECTION UNIT	Screw L/D Ratio	L/D	25
	Screw Diameter	mm	85
	Injection Pressure	Kgf/cm2	1080
	Output(Max)	Pcs/h	9600
	Theory Shot Volume(Max)	cm	1700
	Shot Weight(PS)	g	2040
		ozs	72
CLAMPING UNIT	Clamping Force	T	280
	Clamping Stroke	mm	545
	Max/Min Thickness of Mould	mm	280~700
	Space Between Tie Bars (WxH)	mm	610~610
	Ejector Stroke	mm	150
	Ejector Force	T	10
	NO.of Ejector Pins	PCS	5
	Max Pressure of System	Kg/cm2	140
MOULD&ROBOT	Cavity(Max)	PCS	32
	Neck of Bottle(Max)	mm	42
	Length of Preform(Max)	mm	190
	Weight of Preform(Max)	g	45
	Type of Mould	Needle Valve of No-Cutting PET Preform Molds
	Manipulator	Cavity	32x3
	Cooling Form	Cavity	96
POWER UNIT	Pump Motor Power	KW	45
	Robot Power	KW	10
	Mould Heater Capacity	KW	38
	Heater Input Capacity	KW	37
	Total Power	KW	130
OTHER	Electric Power Supply(3-phase AC)	V/HZ	380/50
	Chilling Water	°C	5~15
		Mpa	0.6
		L/min	420
	Coolling Water	°C	30~55
		Mpa	0.25
		L/min	100
	Compressed Air	Mpa	0.7~0.9
		L/min	570
	Machine Size (LxWxH)	mm	8820x3869x2232

32 cav Pet Preform Injection Molding Systems