ORACLE TM 5030G series of 30% glass fiber reinforced PA6 are Available in nature ,black, heat stablized versions .This series product provides a combination of excellent surface appearance with high tensile and modulus properties. ORACLE 5030G series resins have been used for many under the hood automotive applications, motor housings for power tools and garden appliances .
TEST ITEMS | TEST METHOD AND CONDITIONS | TEST RESULTS | ||
TEST METHOD | UNIT | CONTITIONS | ||
(DRY)23 | ||||
Density | ISO1183-87 | g/cm3 | 1.36 | |
Melt Volume Rate | ISO1133 | cc/10min | (275)2.16kg | 9 |
Tensile strength | ISO527 | MPa | 172 | |
Tensile strain at break | ISO527 | % | 7 | |
Flexural Strength | ISO178 | MPa | 225 | |
Flexural Modulus | ISO178 | MPa | 7,000 | |
Charpy Notched | ISO183-93 | KJ/m2 | 2.9m/s-1J | 23.5 |
Heat distortion temperature | ISO75-93 | 1.8Mpa | 21 | |
Flame resistance | UL-94 | HB | ||
Glass fibre content | % | 30±1 | ||
Processing Guidelines | ||||
Material HandlingMax. Water content: 0.12% Product is supplied in sealed containers and drying prior to molding is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level, but 4-6 hours is generally sufficient | ||||
Typical ProfileMelt Temperature 240-260 °C (464-500 °F) Mold Temperature 60-90 °C (140-194 °F) Injection and Packing Pressure 35-125 bar (500-1500 psi) | ||||
Fill RateFast fill rates are recommended to ensure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate |
We direct our energies to offer users the high-performance, consistent-quality ,cost-saving nylon. Each batch have to pass strict test before they go out .
ORACLE provide six series polyamides resin to serve users a wide range of needs.
>>> General Purpose Homopolymer
>>> Reinforced nylon resin(Glass-reinforced and/or Mineral-reinforced)
>>> Flame Retarded
>>> Friction&Wear resistance
>>> Impact resistance
>>> Special applications
Contact us for further information, general guides and/or additional information about ventilation
PS: ORACLE nylon products are mainly used to make high quality and reliable products. we don't offer recycled & cheap and nasty nylon material
PA6 30%GF high impact