Model No. | DCX-3220 | ||
The max cutting size | 100×100×80mm | ||
Geneva | Geneva number | 3 Pieces | |
Geneva center distance | 220mm | ||
Geneva diameter | φ100±10mm | ||
Geneva effective working length | 100mm | ||
Work table | Work table type | underneath type(Cutting by work piece moving down-top) | |
Table lift drive | AC servo | ||
The biggest table travel | 110mm | ||
The maximum speed for work table | 400mm/min | ||
The minimum speed for work table | 0.01mm/min | ||
The positioning accuracy for work table | ±0.01mm | ||
The rotation angle of work table | ±7.5° | ||
Wire | Use steel wire line diameter | φ0.10——φ0.18mm | |
Store line quantity | 10Kg | ||
Work linear velocity | 280M/min | ||
Maximum line velocity | 300M/min | ||
Tension additional way | Counter weight | ||
Mortar | Applicable powder | GC600——GC6000# | |
Cutting fluid | Oiliness,soluble | ||
Sand barrel capacity | 29.5L | ||
For sand speed | 60L/min | ||
Cooling way | Sandwich water-cooling | ||
Motor | Type | Power | |
Spindle motor | AC servo motor | 1.8KW 1500rpm | |
Pay-off motor | AC servo motor | 1.8KW 1500rpm | |
Take-up motor | AC servo motor | 1.8KW 1500rpm | |
Work table motor | AC servo motor | 100W 3000rpm | |
Take-up and winding line motor | Three-phase asynchronous motor speed | 120W 1500rpm | |
Mortar pump | Three-phase asynchronous motor | 380W | |
Stirring motor | Three-phase asynchronous motor | 550W | |
Washing pump | Three-phase asynchronous motor | 250W | |
Others | Machine power | 380V AC Three-phase 380V | |
Installed capacity | ~10KVA | ||
Compressed air consumption | 0.5Mpa 350L/min | ||
External dimension of the machine | 1640×1600×1700(mm) | ||
Equipment Quality | 1500KG |
Multi Wire Saw basic technical parameters
DCX-3220series high precision and performance cutting multi wire saw