Multi Wire Saw basic technical parameters
Model No. | DCX-2690 | ||
The max cutting size | 480×500×210mm | ||
Geneva | Geneva number | Two pieces | |
Geneva center distance | 690mm | ||
Geneva diameter | φ230±10mm | ||
Geneva effective working length | 500mm | ||
Work table | Work table type | On-top type (Cutting by work piece moving top-down ) | |
Table lift drive | Hydraulic servo control | ||
The biggest table travel | 250mm | ||
The maximum speed for work table | 400mm/min | ||
The min speed for work table | 0.05mm/min | ||
The positioning accuracy for work table | ±0.05mm | ||
Wire | Use steel wire line diameter | φ0.10——φ0.18mm | |
Store line quantity | 50Kg | ||
Work linear velocity | 1000M/min | ||
Tension additional way | AC servo motor | ||
Mortar | Applicable powder | GC600——GC6000# | |
Cutting fluid | Oiliness,soluble | ||
Sand barrel capacity | 125L | ||
For sand speed | 200L/min | ||
Cooling way | Built-in water cooling coil | ||
Motor | Type | Power | |
Spindle motor | AC servo motor | 55KW 1500rpm | |
Pay-off motor | AC servo motor | 11KW 1500rpm | |
Take-up motor | AC servo motor | 11KW 1500rpm | |
Work table motor | AC servo motor | 1.5KW 3000rpm | |
Pay-off tension motor | AC servo motor | 1.8KW 1000rpm | |
Take-up tension motor | AC servo motor | 1.8KW 1000rpm | |
Take-up and winding line motor | AC servo motor | 0.75KW 3000rpm | |
Mortar pump | AC servo motor | 2.2KW | |
Stirring motor | AC servo motor | 0.75KW | |
Washing pump | AC servo motor | 0.75KW | |
Others | Machine power | 380V AC Three-phase 380V | |
Installed capacity | ~100KVA | ||
Compressed air consumption | 0.5Mpa 600L/min | ||
External dimension of the machine | 3100X3100X3000 mm | ||
Equipment Quality | 10000KG |
DCX-2690series high precision and performance cutting multi wire saw