stable quality mesh belt dryer
1.Model:20*3
2.Dimensions:21.27*2.44*3.016
3.Effective drying lengh:20
4.Equipped the motor model:YCT200-4B
5.Yield:6--10
The main technical parameter of the mesh belt dryer
Use: the mesh belt dryer is a kind of drying equipment for batch, continuous production; it is mainly for drying of plate, strip and granular materials with better ventilation. The conveyor directly transports finished balls to the pallet conveyor, and the scraping plate on the upper end of the pallet conveyor arranges these balls evenly on the dryer, improving ventilation property of balls, achieving drying effect, ensuring continuous production of all equipment.
Main principle: The principle is as follows: laid evenly on the mesh belt, driven by the transmission device, the materials move back and forth in the dryer, where hot wind passes through the material and the water vapor is discharged from the weep hole, so as to achieve the purpose of drying. The dryer is composed of standard sections; to save place, the dryer can be made in multi layers, and the common structure includes three layers with two rooms and five layers with two rooms. with 6-40m length and 0.6-3m effective width.
Feature of the mesh belt dryer:
1. small space to take 2. low investment 3. high efficiency 4. large output and high evaporation strength
5. standardized production; the number of segments can be increased according to the output.
Model | Dimensions (m) | Effective dryer length (single) (m) | Width (m) | Motor Model | Motor Power (kw) | Capacity (t/h) |
20m*3layers | 21.27*2.44*3.016 | 20 | 1.9 | YCT200-4B | 7.5 | 6-10 |
stable quality mesh belt dryer Sale promise
Before sale:
(1) Selection of equipment type.
(2) Design and manufacture products according to the special requirement of customers.
(3) Training technical personnel for customers
(4) Send technicians freely to users for site planning, optimal design process and scheme.
During sale:
(1) Acceptance check of products.
(2) Assist customers in drafting construction plan.
After sale:
(1) Appoint specialized aftersale service staff to users for installation and debugging.
(2) Install and debug the equipment.
(3) Train operating personnel.