Machine Brief
This stud roll former mainly consist of hydraulic decoiler, feeding device, roll
forming system, hole puncher (optional), hydraulic post-cutting equipment, run
out table, hydraulic station and PLC controller.
2. Machine Component:
No. | Name | Quantity |
1 | De-coiler | 1 set |
2 | Feeding Guiding Device | 1 set |
3 | Roll Forming Unit | 1 set |
4 | Fly Saw/Hydraulic mold Cutting | 1 set |
3. Machine Specification
Item | Parameter | |
Suitable material | Type | GI, PPGI |
Thickness | 0.4-0.8 (mm) | |
Machine Materia | Active shaft | No. 45 steel tempered |
Roller | No. 45 steel chrome plated | |
Cutting Blade | Cr12 quenched | |
Power Requirement | Type | 80V/3PH/50HZCustomized |
Main Motor | 3kw | |
Hydraulic | 2.2kw | |
Hydraulic Cantilever Decoiler | Type | Hydraulic automatic |
Max Capacity | 2000kgs | |
Suitable OD | 1200mm | |
Suitable ID | 508/610mm | |
Max Width | 300mm | |
Motor Power | 2.2kw | |
Hydraulic Power | 2.2kw | |
Forming Speed (Excludes cutting & punching) | 20-25m/min | |
Forming Stand | About 14 group | |
Transmission | Chain,sprocket | |
Type of Cutting | length-set cutting | |
Control System | Mitsubishi PLC& transducer |
Machine Process :Manual Decoiler ---- Feeding Guide ---- Roll Forming ---- Length Measuring --- Hydraulic Cutting ---Runout table
Detailed Picture& Advantage Decription
New Designed Guiding Device made of incline loop guiding roller, rolling bearings in guiding bar and adjust panel and pinch roller. Can make the sheet feeding more smoothly and precisely. Add pre-cutter in this part, easily for coil change.
Profile:
Other Machine Pictures
5T decoiler
PLC