EG6N(M60-125) miniature circuit breaker is mainly used ofr the protection against overload and short circuit under the AC 50Hz/60Hz,rated voltage 240V/415V and rated current from 63A to 125A.
It also can be used for non-frequent on-and-off switching operation under the normal circumstance.
Rated current in (A) : 63 80 100 125
Poles : 1P 2P 3P 4P
Rated voltage Ue (V) : 240/415
Insulation voltage Ui (V) : 500
Rated breaking capacity (A) :Icu=4500(IEC/EN60947-2) Icn=4500(IEC/EN60898-1)
Electricalfeatures | Standard | IEC/EN 60947-2 | |
rated current in | A | 63,80,100,125 | |
Poles | 1P,2P,3P,4P | ||
Rated voltage Ue | V | 240/415 | |
Insulation voltage Ui | V | 500 | |
rated frequency | Hz | 50/60 | |
Rated breaking capacity | A | 6000 | |
Rated mpulse withstand voltage(1.2/50)Uimp | V | 6000 | |
Dielectric test voltage at and ind.Freq, for 1 min | Kv | 2.5 | |
pollution degree | 3 | ||
Thermo-magnetic release characteristic | 8-12In | ||
Mechenicalfeatures | Electrical life | 1500(In=63A,80A,100A) 1000(In=125A) | |
Mechanical life | 8500(In=63A,80A,100A) 7000(In=125A) | ||
Contact position indicator | Yes | ||
Protection degree | IP20 | ||
Reference temperature for setting of thermal element | 30 | ||
Ambient temperature (with daily average ≤ 35 | -5- +40 | ||
Storage temperation | -25….+70 | ||
Terminal connection type | Cable/Pin-type busbar | ||
Terminal size top/ bottom for busbar | mm2 | 50 | |
AMG | 18-1/0 | ||
Tightening torque | N*m | 35 | |
In-Ibs | 31 | ||
Mounting | On Din rail FN 60715(35MM) by means of fast clip device | ||
Connection | From top and bottom | ||
Combination withaccessories | Auxiliary contact | YES | |
Shunt release | YES | ||
Under voltage release | YES | ||
Alarm contact | YES |