Ads by Google
Description:Nylon Hammer Fixing Anchor
For fixing of concrete, solid bricks, perforated bricks, hollow blocks. The fixings are manufactured from the same highgrade and quality-monitored polyimide (nylon) which is also used for the frame fixings with general building inspectorate approval. The material is temperature resistant -40ºC to + 80ºC Presembled for quick and easy installation, High holding power.
Specification:
| Item Code | Anchor Size | Box Qty | Master Qty |
| FFNA3161 | 3/16 X 1 | 100 | 10 |
| FFNA3161112 | 3/16 X 1-1/2 | 100 | 10 |
| FFNA1434 | 1/4 X 3/4 | 100 | 10 |
| FFNA141 | 1/4 X 1 | 100 | 10 |
| FFNA14112 | 1/4 X 1-1/2 | 100 | 10 |
| FFNA142 | 1/4 X 2 | 100 | 10 |
| FFNA143 | 1/4 X 3 | 100 | 10 |
| FFNA144 | 1/4 X 4 | 100 | 10 |
| Item Code | Anchor Size | Drill Size | Screw Size |
| FFNNAL530 | 5 X 30mm | Ø5mm | 3.5 X 38mm |
| FFNNAL540 | 5 X 40mm | Ø5mm | 3.5 X 48mm |
| FFNNAL550 | 5 X 50mm | Ø5mm | 3.5 X 58mm |
| FFNNAL640 | 6 X 40mm | Ø6mm | 4 X 48mm |
| FFNNAL660 | 6 X 60mm | Ø6mm | 4 X 64mm |
| FFNNAL680 | 6 X 80mm | Ø6mm | 4 X 88mm |
| FFNNAL860 | 8 X 60mm | Ø8mm | 5 X 65mm |
| FFNNAL880 | 8 X 80mm | Ø8mm | 5 X 85mm |
| FFNNAL8100 | 8 X 100mm | Ø8mm | 5 X 105mm |
| FFNNAL8120 | 8 X 120mm | Ø8mm | 5 X 125mm |
| FFNNAL10100 | 10 X 100mm | Ø10mm | 7 X 110mm |
| FFNNAL10135 | 10 X 135mm | Ø10mm | 7 X 145mm |
| FFNNAL10160 | 10 X 160mm | Ø10mm | 7 X 170mm |
INSTALLATION
Using the proper diameter bit, drill a hole into the base material to a depth of at least 1/4" deeper than the required embedment. The tolerances of the drill bit used should meet the requirements of ANSI Standard B212.15. Blow the hole clean of dust and other material.
Insert the anchor through the fixture. Drive the nail into the anchor body to expand it. Be sure the head is seated firmly against the fixture and that the anchor is at the proper embedment. This anchor is not recommended for use overhead.
Packing For Nylon Anchor
Update Date:2012-04-02 04:47:20
Nylon Hammer Fixing Anchor