Nnylon Hammer Drive Anchor 1) Material: Nylon, PE 2) Diameter:M5--M10 3) Length:30--160mm 4) Packing: Carton Box + Pallet

Description: Nnylon Hammer Drive Anchor

Nnylon Hammer Drive Anchor is ideal for a wide variety of light load fastening in wood. hardboard, plaster, metal, cinder block, brick, skate, marble, plastic, tile, glass and concrete, It's unique design allows the nail to expand the anchor uniformly in the hole. 1. The anchor body is manufactured from virgin nylon to withstand high impact or shock loads. And its great tensile strength males it unusually resistant to vibration loads.2. The nylon is resistant to chemicals, fungus, moisture and other atmospheric conditions.3. Electrical and thermal insulating properties are excellent. Thermal resistance ranges from -40°~F + 170°~F.4. The pin is made of high strength steel and heavily zinc plated for maximum corrosion resistance.

Specification:

Item Code	Anchor Size	Box Qty	Master Qty
FFNA3161	3/16 X 1	100	10
FFNA3161112	3/16 X 1-1/2	100	10
FFNA1434	1/4 X 3/4	100	10
FFNA141	1/4 X 1	100	10
FFNA14112	1/4 X 1-1/2	100	10
FFNA142	1/4 X 2	100	10
FFNA143	1/4 X 3	100	10
FFNA144	1/4 X 4	100	10

Item Code	Anchor Size	Drill Size	Screw Size
FFNNAL530	5 X 30mm	Ø5mm	3.5 X 38mm
FFNNAL540	5 X 40mm	Ø5mm	3.5 X 48mm
FFNNAL550	5 X 50mm	Ø5mm	3.5 X 58mm
FFNNAL640	6 X 40mm	Ø6mm	4 X 48mm
FFNNAL660	6 X 60mm	Ø6mm	4 X 64mm
FFNNAL680	6 X 80mm	Ø6mm	4 X 88mm
FFNNAL860	8 X 60mm	Ø8mm	5 X 65mm
FFNNAL880	8 X 80mm	Ø8mm	5 X 85mm
FFNNAL8100	8 X 100mm	Ø8mm	5 X 105mm
FFNNAL8120	8 X 120mm	Ø8mm	5 X 125mm
FFNNAL10100	10 X 100mm	Ø10mm	7 X 110mm
FFNNAL10135	10 X 135mm	Ø10mm	7 X 145mm
FFNNAL10160	10 X 160mm	Ø10mm	7 X 170mm

INSTALLATION

Using the proper diameter bit, drill a hole into the base material to a depth of at least 1/4" deeper than the required embedment. The tolerances of the drill bit used should meet the requirements of ANSI Standard B212.15. Blow the hole clean of dust and other material.

Insert the anchor through the fixture. Drive the nail into the anchor body to expand it. Be sure the head is seated firmly against the fixture and that the anchor is at the proper embedment. This anchor is not recommended for use overhead.

Packing For Nylon Anchor

Update Date:2012-04-02 04:27:46

Nnylon Hammer Drive Anchor