1. Integrates 2 Wireless Bands 2. More than 50 dB Input Isolation 3. High Avg. Power 4. RoHS compliant APPLICATION 

nCombiners are used to de-couple two or more channels on different frequencies, thus allowing the common utilization of one antenna feed cable or one antenna by several transmitters or receivers.

nAll combiners work in bi-directional mode and can therefore be used to combine and split the transmitted and received signals.

FEATURE  

nMinimal RF Insertion Loss

nRoHS compliant

nVery Low Cost Design

nN or 7-16 mm connectors

nExcellent de-coupling performance

nSuperior intermodulation properties prevent

nBrackets for mast and wall mounting

nLow VSWR

nCompact design and easy installation

nExtremely broad bandwidth

nCustom Designs Available

TYPICAL SPECIFICATION

Part number	PN 80 86 30	PN 80 86 31	PN 80 86 32	PN 80 86 33
Frequency Range(MHz) Band1 Band2 Band3	30~180 330~520 740~960	1710~1880 1920~2170 2520~2690	380-960 1710-1880 1920-2170&2500-2700	380-960 1710-1880 1920-2170
Band Width(MHz)	150/190/220	170/250/250	580/170/450	580/170/250
Insertion Loss (dB)	≤1.2	<0.5	≤0.3	≤0.3
Ripple in-band(dB)	≤0.8	<0.3	≤0.3	≤0.3
Stop-band Attenuation (dB)	≥45	>70	≥50	≥50
Return Loss(dB)	≥18	≥18	≥18	≥18
PIM(dBc) +43 dBm x 2	≤-145	≤-145	≤-150	≤-150
Impedance(Ω)	50	50	50	50
Ingress protection	Outdoor IP66	Indoor IP65	Indoor IP65	Indoor IP65
Connectors	N-F	N-F	N-F	N-F
Power Rating(W)	30(continue)	200(Continuous)/Ports	200(Continuous)	200(Continuous)
Temperature(°C)	-25~+65	-20~+70	-20 to 70	-20 to 70

RF Combiner triplexer