1. Integrates 2 Wireless Bands 2. More than 50 dB Input Isolation 3. High Avg. Power 4. RoHS compliant APPLICATION 

nCombiners are used to de-couple two or more channels on different frequencies, thus allowing the common utilization of one antenna feed cable or one antenna by several transmitters or receivers.

nAll combiners work in bi-directional mode and can therefore be used to combine and split the transmitted and received signals.

FEATURE  

nMinimal RF Insertion Loss

nRoHS compliant

nVery Low Cost Design

nN or 7-16 mm connectors

nExcellent de-coupling performance

nSuperior intermodulation properties prevent

nBrackets for mast and wall mounting

nLow VSWR

nCompact design and easy installation

nExtremely broad bandwidth

nCustom Designs Available

TYPICAL SPECIFICATION

Part number	PN 79 86 30	PN 79 86 31	PN 79 86 32	PN 79 86 33	PN 79 86 33
Pass band(MHz) Low band High band	1710~1880 1920-2170	380~470 800~960/1710~2700	800~2200 2400-2500	380-960 1710-2700	806-960 1710-2170
Band Width (MHz)	170/250	90/1150	1400/100	580/990	154/460
Insertion Loss (dB)	≤0.3	≤0.75/≤0.4	≤0.5	≤0.2	≤0.3
Ripple in-band (dB)	≤0.15	≤0.55/≤0.25	≤0.4	≤0.2	≤0.2
Isolation (dB)	≥60	≥70/≥50	≥80	≥55	≥50
Power Rating (W)	200/300	50/100	50	300	300
Return Loss (dB)	≥18	≥16	≥18	≥18	≥18
Connectors	DIN-F	N-F	N-F	N-F	DIN-F
DC (mA)	1000 (all ports)	N/A	N/A	N/A	<2500
PIM3(dBc)@ 43dBm×2	≤-150	≤-150	≤-140	≤-150	≤-150
Impedance (Ω)	50	50	50	50	50
Temperature (°C)	-40 to +70	-0 to +50	-40 to +70	-40 to +60	-40 to +60
Mounting	With 4 screws (max. 4 mm diameter)
MTBF (Hours)	>100000

RF Combiner diplexer