1.Type:Copper Brazed Plate Heat Exchanger 2.Application:steam heating 3.Plate:stainless steel AISI 316 4.Power:5-70KW

Equal Danfoss B3-052 Stainless Steel 316L/304 plates Copper/Nickel Brazed Plate Heat Exchanger for steam water heating BL50C

Model	BL50C
Width, A [mm]	111
Height, B [mm]	525
Length, E [mm]	10+2.35n
Horizontal port distance, C [mm]	50
Vertical port distance, D [mm]	466
Max pressure [Mpa]	3/4.5
Max flowrate [M3/h]	12.7
Weight [kg]	2.6+0.19n

 

Model	BL14	BL20	BL26	BL26C	BL50	BL95
Width, A [mm]	78	76	111	124	111	191
Height, B [mm]	206	310	310	304	525	616
Length, E [mm]	9+2.3n	9+2.3n	10+2.36n	13+2.4n	10+2.35n	11+2.35n
Horizontal port distance, C [mm]	42	42	50	70	50	92
Vertical port distance, D [mm]	172	282	250	250	466	519
Max pressure [Mpa]	3	3	3	3/4.5	3/4.5	3/4.5
Max flowrate [M3/h]	3.6	3.6	8.1	8.1	12.7	39
Weight [kg]	0.6+0.06n	1.0+0.08n	1.3+0.12n	2.2+0.16n	2.6+0.19n	7.8+0.36n

Model	BL120	BL190	BL200	BL1400	BL100  *	BL200  *
Width, A [mm]	246	307	321	429	248	322
Height, B [mm]	528	696	738	1398	495	739
Length, E [mm]	13+2.36n	13+2.75n	13+2.7n	22+2.78n	10+2.15n	13+2.55n
Horizontal port distance, C [mm]	174	179	188	220	157	205.2
Vertical port distance, D [mm]	456	567	603	1190	405	631
Max pressure [Mpa]	3	3	2.1	1.5	3/4.5	3/4.5
Max flowrate [M3/h]	42	100	100	300	42	100
Weight [kg]	7.2+0.52n	12.5+0.72n	13+0.75n	31.8+1.73n	6.5+0.37n	13+0.78n

Brazed plate condensers – flow principle

The main components are the same as for the evaporator. The refrigerant enters at top left of the exchanger as

hot gas and starts to condense on the surface of the channels until fully condensed, and is then slightly subcooled.

The process is called "free condensation". In the enclosed condenser picture the light and dark blue arrows show

the location of the brine connections. The refrigerant flows counter current in the opposite channel and is cooled.

The light and dark red arrows indicate the locations of the refrigerant connections.

Standard design

The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel

plates are corrugated to improve heat transfer efficiency and to make them rigid. 

Standard materials

Cover plates: Stainless steel AISI 316

Connections: Stainless steel AISI 316

Plates: Stainless steel AISI 316

Brazing material: Copper

 

Particulars required for quotation

To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following

particulars:

– flow rates or heat load required

– temperature program

– physical properties of liquids in question

– desired working pressure

– maximum permitted pressure drop

 

Advantages of brazed plate heat exchangers in Industry and HVAC&R

The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial

and HVAC&R applications.

– The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space

is limited.

– The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e.g. in district

heating.

– The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very

short delivery time.

 

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support