Ads by Google
Equal ALFA LAVAL TS6M gasket plate heat exhcanger steam heat exchanger 10/16 bar 20kg/s for HVAC steam heating
Model | SH60 | |
Cross Reference ALFA LAVAL | TS6M | |
Height, H [mm] | 704 | 704 |
Width, W [mm] | 400 | 410 |
Min standard length, L [mm] | 530 | 540 |
Max standard length, L [mm] | 1430 | 1440 |
Vertical port distance, VC [mm] | 380 | 380 |
Horizontal port distance, HC [mm] | 203 | 203 |
Max temperature [°C] | 180 | 180 |
Max pressure [barg] | 16 | 20.6 |
Flange size | DN65/2” | DN65/2” |
Max. flow rate [kg/s] | 20 | |
Material of Plate | Suited Liquid Kinds | ||
Stainless Steel (AISI304.316 Etc) | Pure Water, Normal Water, Oil for eating, Mineral Oil | ||
Ti, Ti-pd | Sea Water, Saline Water, Mineral Water | ||
20Cr, 18Ni, 6Mo (254SMO) | Dilute Sulphuric Acid, Organic Water Solution | ||
Ni | High-temp and concentration caustic soda | ||
Hastelloy (C276, D205, B2G) | Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid | ||
Material of Gasket | Operating Temperature ° C | Suited Liquid Kinds | |
NBR | -15~+135° C | Water, Sea Water, Mineral Oil, Salinous Water | |
EPDM | -25~+180° C | Hot Water, Steam, Acid, Alkali | |
F26 | -55~+230° C | Acid, Alkali | |
TPF | 0~+160° C | High Concentrated Acid, Alkali, High temperature Oil, Steam | |
Working principle
Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through
alternate channels. The heat is transferred through the plate between the channels, and complete counter-current
flow is reated for highest possible efficiency. The corrugation of the plates provides the passage between the plates,
supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.
STANDARD MATERIALS
Frame plate: Mild steel Epoxy painted
Nozzles: Carbon steel
Metal lined: Stainless steel, Titanium
Plates: Stainless steel Alloy 316 or Titanium
A great advance on conventional PHEs
Optimized plate design
The BS Series solves two main problems that occur when conventional plate heat exchangers (PHEs) are used
as steam heaters. The first is that when water is heated over a relatively wide temperature difference, e.g. from
10 to 70°C (50 to 158°F), the high steam velocity causes erosion and noise problems. The second is that when
high water flow rates are used when heating water only a few degrees, the PHE has to be oversized to keep the
secondary side (water) pressure drop within reasonable limits. Both of these drawbacks are now eliminated in
the new BS Series of PHEs by a unique plate geometry that allows problem-free heating over narrow and wide
temperature ranges.
Way ahead of shell-and-tubes
No thermal fatigue Cyclic heating and cooling produces thermal fatigue in rigid steam heaters like straight
shell-and-tubes. This often results in cracked and worn components that demand maintenance and repair, thereby
causing unwanted system downtime. The combination of thin plates and flexible gaskets in the BS Series prevents
thermal fatigue by allowing the units to expand and contract in response to temperature changes. Fine temperature
control Rapid heat transfer resulting from the small hold-up volume and high surface/volume ratio of the plates
enables a fast response to temperature control.Manufacturing
Chemical processing
HVAC
Marine
Food and drink
PharmaceuticalShort delivery time.
High quality
Reasonable price
Customer made
Know-how design and customer support