Mini2440 embeded board with 400 MHz S3C2440 processor; Size:10 cm x 10 cm; 128MB/256MB/1GB Nand Flash; OS: WINCE/LUNIX.

S3C2440 ARM9 Embeded Development Board Mini2440+VGA Moudel

About Mini2440 Development BoardMini2440 is a practical low-cost ARM9 development board, is currently the highest in a cost-effective learning board. It is for the Samsung S3C2440 processor and the use of professional power stable core CPU chip to chip and reset security permit system stability. The Mini2440 immersion gold PCB using the 4-layer board design process, professional, such as long-wiring to ensure that the key signal lines of signal integrity, the production of SMT machine, mass production; the factory have been a strict quality control, with very detailed in this manual can help you quickly master the development of embeded Linux and WinCE process, as long as there is C language based on the general entry to two weeks.

Mini2440 Board Specification:

Dimension: 100 x 100 mm CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz) RAM: 64 MB SDRAM, 32 bit Bus Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS EEPROM: 1024 Byte (I2C) Ext. Memory: SD-Card socket Serial Ports: 1x DB9 connector (RS232), total: 3x serial port connectors USB: 1x USB-A Host, 1x USB-B Device Audio Output: 3.5 mm stereo jack Audio Input: Connector + Condenser microphone Ethernet: RJ-45 10/100M (DM9000) RTC: Real Time Clock with battery Beeper: PWM buzzer Camera: 20 pin Camera interface (2.0 mm) LCD Interface STN Displays: Monochrome, 4 gray levels, 16 gray levels, 256 colors, 4096 colors Max: 1024x768 TFT Displays: Monochrome, 4 gray levels, 16 gray levels, 256 colors, 64k colors, true color Max: 1024x768 41 pin connector for FriendlyARM Displays (3.5" and 7") and VGA Board Touch Panel: 4 wire resistiveUser Inputs: 6x push buttons and 1x A/D pot User Outputs: 4x LEDs Expansion: 40 pin System Bus, 34 pin GPIO, 10 pin Buttons (2.0 mm) Debug: 10 pin JTAG (2.0 mm) Power: 5V connector, power switch and LED Power Supply: regulated 5V (Mini2440: 0.3 A, Mini2440 + 3.5" LCD: 0.6 A, Mini2440 + 7" LCD: 1 A) OS Support Windows CE 5 and 6 Linux 2.6

Other Optional Accessories:

**CMOS130 Camera;

**USB-WIFI (WinCE 4.2/5.0 drive)

**JLINK V8 Emulator

S3C2440 ARM9 Embeded Board Mini2440+VGA Moudel