1.single mode single fiber 2.Support auto-negotitation 3,Humidity:10% to 90% no condensing 4,long distance transmission Fast Ethernet Single Fibre Media ConverterDescription:The XTR100-LD13(15) series consists of a series of 10/100Base-TX to 100Base-FX Auto-negotiation mode Media Converter. User now may upgrade or extend their existing 100Base-TX or even 10Base-T network into fiber network easily. XTR100-LD13(15) series are fully compliant with IEEE802.3 Ethernet standard. The RJ45 (STP) port of XTR100 support auto-negotiation functions, provide a maximum bandwidth of up to 200Mbps (100M full duplex) or up to 20Mbps (10M, full duplex) for distances of up to 2Km - when using multimode fiber cable; or up to 100km - when using single-mode fiber cable. Installation and operation of the XTR100-LD13(15) is simple and straightforward. Bi-Di 10M/100M Media Converter Specifications: The Converter conforms to the following standards: Standards: IEEE802.3u 10/100Base-TX and 100Base-FX Connectors ( RJ45-UTP/STP and Fiber SC ) Data Transfer Mode: 100Mbps Power Requirement: 1A@+5VDC Operation Temperature: -10°C to 65°C Storage Temperature: -40°C to 70°C Humidity: 10% to 90% no condensing Dimensions: 94 X 70 X 25 mm ( L x W x H ) UTP Cable: Cat.5 cable up to 100m Fiber Cable: 50/125,62.5/125 or 100/140μm multi-mode 8.3/125,8.7/125,9/125 or 10/125μm single-mode Optical Power Receive Sensitive Media Converter Production Information 1. Overview The 10/100Base-TX Fast Ethernet Converter is fully compliant with all IEE802.3&802.3u standards. This converter is available in SIX different Models: Six LED display instant status monitoring for Power, Full-Duplex, FX Link, FX Activity, TX Link, TX Activity. 2. Checklist Your XTR100 series carton should contain the following items: XTR100-S13/L13 or XTR100-S85 or XTR100-LD, etc. AC-DC Power Adapter This User’s Guide Please notify your sales representative immediately if any items are missing or damaged.3. Installation For as a stand-alone unit: → Verify the AC-DC adapter conforms to your country AC power requirement and inset the power plug → Connect the media cable for network connection For as a slide-in unit: → The slide in media Converter and Converter Rack Should be supplied only from the same source, Both Media Converter → Verter and rack are built to match each other at dimensions, DC receptance and power safety → Turn off the 19” converter rack power → Ensure that there is no activity in the network → Locate +5VDC power jack on converter back, carefully slide in and plug to 19” racd+5VDC power receptacle

Single mode Single Fiber Media Converter