Ads by Google
welding material :
Soldering in TV set, radio or normal home appliances
Repair of normal home appliances and audio facilities
Soldering in radio transponder, instrument and calculator and so on
How to chose solder | |
1. | Select the solder composition. First choose between leaded or lead free and then between high or low temperature. Choose high temperature for easily accessible connections and low temperature for smaller, crowded connections. Next choose the alloy. Leaded solder ranges from 40 percent tin and 60 percent lead (40/60) to 50/50, 60/40 and 63/37. The first number always represents the tin content; the higher the tin content, the lower the melting point. The most common lead-free solder contains 95 percent tin and 5 percent antimony but has a melting point between that of 40/60 and 50/50 tin/lead solder. Only experience will direct you in making exact choices for your application |
2. | Select the diameter of the solder wire, from between 0.01 inch (0.25 mm) to 0.125 inch (3.25 mm). You must heat the metals to melt the solder as quickly as possible. The smaller the diameter of the solder wire, the faster it will melt. But if you choose too small of a diameter, you will not get enough solder on the joint in one pass. If you choose too large, excess heat may damage your components, or you may get a solder blob. |
3. | Select flux core or no core. All solder joints need flux, which can be applied from a tube, with a brush, from the core of the solder or in any combination, depending on your personal style. But you must apply flux in one manner or another. The style you develop for soldering will determine the best choice for your application, but to be safe, always use a flux core so that you don’t forget. |
Features | |
Tin solder include Tin-Lead solder bar and Lead-free solder bar. | |
1) It can applied in radio, communication, meters, instruments and copper, tin and irons and etc. | |
2) Residue is easy to remove by hot air after soldering work if necessary | |
3) Available in many alloy composition, other alloy compositions are also available | |
4) Smooth surface, good fluidness melt | |
5) Good mechanical performance | |
6) Good moisture, bright weld spot | |
8) Forms: Bar, wire | |
We also produce the solder flux to match with this kind of the tin solder bar or wire. We have three types of this kind of flux; they are no-clean liquid flux, rosin liquid flux, water-soluble liquid flux. | |
Kinds of Product: | 1)Tin solder |
2)Lead-Free solder bar and wire | |
3)Tin welding wire | |
Solder sometimes in is metal alloy used to join together metal workpieces and having a melting point below that of the workpiece(s).
Soft solder is typically thought of when solder or soldering is mentioned, with a typical melting range of 90 to 450 °C (190 to 840 °F). [3] It is commonly used in electronics, plumbing, and assembly of sheet metal parts. Manual soldering uses a soldering iron or soldering gun. Alloys that melt between 180 and 190 °C (360 and 370 °F) are the most commonly used. Soldering performed using alloys with melting point above 450 °C (840 °F) is called 'hard soldering', 'silver soldering', or brazing.
10pcs /box 1.0mm dia welding material Sn-58Bi