Description & Applications:
1. Aluminum titanium acid sinter flux
2. AC/DC, the welding wire connect the anode in the basis of DC welding
3. Can welding low carbon structural steel and low alloy steel. Such as ships, boiler, pressure vessel
4. Especially is suitable for high speed welding plate
5. Especially it is insensitive to oil, rust, scale and dirt on the surface to be welded. Most being applied to double-side with single pass weld and fillet welds.
Compositions of fluxes (%)
SiO2+TiO2 | Al2O3+MnO | CaF2 | S | P |
25-35 | 50-60 | 3-10 | ≤0.06 | ≤0.08 |
Typical all weld metal mechanical property
Wire | Yield Strength | Tensile Strenght | Elongation | AKV(J) | |
20°C | 0°C | ||||
H08A | ≥330Mpa | 415-550Mpa | ≥22% | ≥50 | ≥27 |
H08MnA | ≥400Mpa | 480-650Mpa | ≥22% | ≥507 | ≥27 |
EL12 | ≥330Mpa | 415-550Mpa | ≥22% | ---- | ≥27 |
EM12k | ≥400Mpa | 480-650Mpa | ≥22% | ---- | ≥27 |
Remark
1. Before welding, fluxes should be baked for two hours at 300-350°C
2. Removal of rust, oil, dirt, water, impurities, etc in welding-areas