Welcome to ECOL - Join Free - Sign In
Paraffin Wax warmer
Paraffin Wax warmer
Supplier Info
[China Supplier]
Contact Person : Mr. Wu Jinxi
Tel : 0086-577-27818801
Fax : 86-577-61523832
Product Detail
Paraffin Wax Machine,Skin Care,Wax Pot With CE And ROHS

Paraffin Wax Machine,Skin Care,Wax Pot

Warning: Whenever and wherever and electric apparatus is used, especially when there are children nearby, attention should be paid to the following: 1.      Immediately unplug the power from the power outlet after exhausted. (Attention: you must be used with a leak proof electrical outlet protection switch).2.      Do not used and stored in the bathroom or other damp places.3.      Do not be used in any way to extend the power cord...4.      The user can not leave the machine when plug in the power plug, and to supervise children shall not be closer to it.5.      Do not invasive water or other liquids.If it accidentally fall into the water, dont close to the water or touch this machine, you need to unplug the power and far away from power outlet. Operation: How to add wax and heat1.      The machine will be placed in a stable heat-resistant desktop,then shrink-wrap the wax and crack into small pieces that is package by plastic bags and special used in this machine, Open the lid of the machine, put the small pieces wax into this containers.2.      Plug the power plug into the power outlet that will be fit for the voltage (the logo was put on the bottom of the machine) after check and confirm the switch is pointed to off, close the lid to keep away from dust and keep temperature, put the switch point to HI, the red light and green light will be on, that is to say this machine is already connected power and heat wax. You can do the physical therapy after closing the lid ,heat wax about 90 minutes and have a suitable temperature.(red light is power direction,green light is working direction,this machine will be stop heating automatically when the temperature reach your setup ,and the green light will be off at the same time )..........3.      The surface of heated wax will be not higher than XAM line, also can not be lower than NIM line,it should keep between two line ...
Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.