Metal Pall ring is one of the most common and well-known packing, Metal Pall Ring is an industry standard design media developed from the Raschig Ring and is used widely in all variety of applications. By minimizing the number of contours and crevices that can cause liquid hold-up and potential entrainment, the Metal pall ring geometry enables high gas and liquid transfer rates. The opened cylinder walls and inward bent protrusions of the Metal pall Ring allow greater capacity and lower pressure drop than standard cylindrical rings. This open ring design also maintains an even distribution and resists wall-channeling tendencies. The interior and exterior contacting surfaces of the Metal pall ring provide for an effective distribution of liquids and gasses and resist plugging, fouling and nesting. Pall rings are available in a wide range of materials, such as Stainless steel, carbon steel, aluminum, bronze and other alloy.
Metal Pall Ring Features:
1. High loading & throughput, low pressure drop, Good liquid & gas distribution and high mass transfer efficiency.
2. Versatility, Easily wettable, high resistance to fouling.
3. High Mechanical Strength, High temperature applications, mechanically robust, lesser probability of breakage, suitable for deeper beds.
Technical data of metal pall ring:
Diameter (mm) | Dimension d×h×δ (mm) | Specific surface area (m2/m3) | Void volume(m3/m3) | Dry packing factor ( m-1 ) | Heaping number (n/m3) | Heaping weight (kg/m3) |
Φ16 | 16×16×0.3/0.4 | 362/371 | 0.949/0.933 | 423/457 | 214000 | 396/527 |
Φ25 | 25×25×0.5/0.6 | 219/223 | 0.950/0.940 | 255/268 | 51940 | 393/471 |
Φ38 | 38×38×0.6/0.8 | 146/149 | 0.959/0.946 | 165/176 | 15180 | 318/424 |
Φ50 | 50×50×0.8/1.0 | 109/110 | 0.960/0.950 | 124/128 | 6500 | 314/393 |
Φ76 | 76×76×1.2/1.5 | 71/72 | 0.961/0.951 | 80/84 | 1830 | 308/384 |
Φ100 | 100×100×1.8/2.0 | 74/35 | 0.965/.955 | 50/53 | 1200 | 370/371 |
Metal pall ring for water treatment