Ads by Google
1000L/H R.O. Water Purification System
Design basis and treated water standard:1. Design Basis
1.1 Produced water’s application: Pure drinking water1.2 The capacity of produced water: 1000L /H
1.3 System Configuration: Pretreatment + One Stage Reverse Osmosis Desalination System.
1.4 Designed recovery: 50-65%.
1.5 Rejection rate:≥ 97%
1.6 Voltage: 3 phases, 380V, 50Hz; Power: 2.8KW (Can be customized at your country’s voltage, please tell us about it when ordering)
System requirements:
2.1 Inlet pipelines: inlet pipe connected with the raw water tank entrance.
2.2 Cable: According to the calculated capacity of electric power, the user should send it on the control cabinet. 2.3 Outlet water pipelines: From pure water tank to the pure water using point.
2.4 Concentrated Water Treatment: Discharge to the wastewater pool (user considered).
2.5 Water temperature:5-35 dgre
Process:
Water Source - Raw Water Tank - Booster Pump - Sand Filter - Carbon Filter
|
Pure Water Tank - R.O.System - High pressure pump - Security Filter
Main Components List:
Basic Configuration | Item | Description |
Pretreatment part | Feed pump | CNP CDL2-50 |
Sand filter | Dia 400*1600 (filter 230kg) SUS304/FPR | |
Active Carbon filter | Dia 400*1600 (filter 85kg) SUS304/FPR | |
Micron filter | 20" X 5 micron filter | |
RO Part | Pressure pump | CNP CDL2-180 |
RO membrane | FILMTEC BW30-4040 x 3pcs | |
Membrane vessel | 4040 stainless steel VESSEL 3 SETS | |
Indicators | TDS,PH and Conductivity indicator | |
Piping and controlling valve | Piping and valves | U-PVC piping & Valves |
Control system & Indicator | Water level control, Pump protecting, Automatic electric valve control | |
Other fittings of machine | Pressure gage | 4 sets |
Conductivity table | CM230 X 2sets | |
Main frame | Stainless steel 1set | |
solenoid valve | DN20 1set | |
Pipeline flow meter | 10GMP 2sets |