1.Large liquid treat capacity 2.Large dirt capacity 3.High filter efficiency 4.Simple operation 5.Low cost maintenance

Multiple bag filtration system

Equipment Principle

Wide availability of liquid filtration equipment. It can effectively remove liquid particles of different sizes, so as to achieve liquid filtration, purification, separation, recycling purposes.

Components: filter container, filter basket, filter bag. We can install many bags in filter container according to customer requirements. The liquid enter into the container through side or bottom. Filter bag expand symmetrical in case of liquid wallop. The liquid will be out from bottom as well as the impurities stay in the filter bag. When the filter process has completed, the operator just loosen the bolt and rotate the hand wheel to enhance the cover to remove filter bag, then clean or replace the filter bag

Features

Large liquid treat capacityLarge dirt capacityHigh filter efficiencySimple operationLow cost maintenance

Character

Simple and convenient operation, simple installationHigh precision filter which is used to every kind of particles or suspended solids, filtration can range from 1 to 800 microns.Effective filter area is big and 5 to 10 times compared with other same type filter equipment. That’s means it can reduce cost largely.Liquid treat capacity can reaches to 1 to 1000m3/H, the cost is little.The equipment can be used to coarse and precision filterHigh liquid treat capacity unit area, small filter resistance, high filter efficiencyWhen you want to achieve to same filter efficiency, the cost of bag filter is small and life is long compared with precision filter and strainer filterThe filter bag can be used repeating.

Internal structure

1. Each bag has a separate locking device with no side leakage opportunities

2. Integrated design of precision without distortion

3. Integrated precision with lifting device

4. O-ring seal, high-strength and quick bolts

Application

Paint, Beer, Vegetable oil, Pharmaceuticals, Cosmetics, Chemicals, Petroleum products, Chemicals, Electroplating solution, Milk, Mineral water, Hot solvents, Latex, Industrial water, Coatings and paints, Sugar, Molasses, Resins, Inks, Industrial waste water, Juice, Cooking oil, Wax, Precision filters and other industries.

Many bags filter parameter

Model	Filter diameter	Filter bag quantity	Filter area	Inlet and outlet diameter 1’’=25mm	Treat liquid capacity( m3/H)	Withstand pressure MPA
DH02-2#	φ400	2	1m2	DN80mm	80	0.6-1.6 MPA
DH03-2#	φ500	3	1m2	DN100mm	120	0.6-1.6 MPA
DH04-2#	φ600	4	2m2	DN125mm	160	0.6-1.6 MPA
DH05-2#	φ650	5	2.5m2	DN125mm	200	0.6-1.6 MPA
DH06-2#	φ700	6	3m2	DN150mm	240	0.6-1.6 MPA
DH08-2#	φ800	8	4m2	DN200mm	320	0.6-1.6 MPA
DH10-2#	φ1000	10	5m2	DN250mm	400	0.6-1.6 MPA
DH12-2#	φ1000	12	6m2	DN250mm	480	0.6-1.6 MPA
DH16-2#	φ1200	16	8m2	DN300mm	640	0.6-1.6 MPA
DH20-2#	φ1400	20	10m2	DN300mm	800	0.6-1.6 MPA
DH24-2#	φ1400	24	12m2	DN350mm	1000	0.6-1.6 MPA

Filter bag

     

1. Choose the imported high purified filament fiber material, singeing the surface of a special treatment to prevent pollution of the filtrate fiber shedding. Three-dimesional have a high ability to capture solids and colloidal particles. Hig-strength fiber has high filtration efficiency, stability and long life. Filter bag is produced on the standard of America production standard, GMP requirement and FDA requirement of domestic pharmaceutical industry.

2. Filter material: special withstand high temperature and acid polytetrafluoroethylene, PE, PP, nylon, NMO and so on. Stainless steel(SUS304) can reaches to filter percision from 0.5 to 1000 microns.

3. Bag collar: stainless steel ring, galvanized steel ring, PP, PE plastic ring and polyester rope.

4. The technical of filter bag welding is such as, plastic ring welding, seam welding and sewing the end including sewing, anti-seam and so on. We can supply the special filter bag based on customer’s requirement besides of supplying the industry standard filter bag(01#,02#,04#).

5. Filter basket

  Filter equipment support the filter basket, one time machining molding. It has a circular cylinder high-strength slot in tube body.

multiple bag filtration system