waste rubber recycling machine to fuel oil Export to India, Pakistan, Turkey , etc. material :PE ,PP , PS , ABS.

 

 

 

Technical parameter of DINTER Pyrolysis Equipment
	Items	Contents
1	Equipment type	HY-6	HY-8	HY-10
2	Raw material	tires/Plastic	tires/Plastic	tires/Plastic
3	Structural form	Horizontal rotation	Horizontal rotation	Horizontal rotation
4	24-hour Capacity	6 ton	8 ton	10 ton
5	Oil yield	2.7ton	3.6 ton	4.5 ton
6	Operating pressure	Normal	Normal	Normal
7	Material of Reactor	Q245R	Q245R	Q245R
8	Thickness of Reactor	16mm	16mm	16mm
9	Rotate speed of Reactor	0.8turn/minute	0.8turn/minute	0.8turn/minute
10	Total power	19.5KW	19.5KW	23.5KW
11	Mode of cooling	Water cooling	Water cooling	Water cooling
12	Cooling area of condenser	40sqm	40sqm	65sqm
13	Kind of transmission	Internal gear drive	Internal gear drive	Internal gear drive
14	Noise dB(A)	≤85	≤85	≤85
15	Size of Reactor(D×L)	2200×6000	2200×6600	2600×6600
16	Working form	Intermittent operation	Intermittent operation	Intermittent operation
17	Delivery time	15days	15days	15days
18	Weight	25T	30T	30t

working process:

Firstly ,put the raw material into reactor door, seal the feed inlet system.

secondly,burn the fuel material(coal,wood,or natural gas ,oil ) in the combustion system .the reactor will slowly heat ,when the temperature reach around 250 degree celsius,it will produce oil gas .

oil gas will be processed by our technology ,then gone to cooling system to cold liquid oil.

the gas which can not liquid under normal pressure ,which will be desinged to back to combustion system to instead the fuel material to burn the reactor which can save energy very much .

after finishing oil produce ,the temperature of reactor will go down ,at the same time ,carbon black will be discharged automatically.

Lastly,when the temperature fall to 100 degree celsius,worker could open the door of reactor to discharge of steel wire, then can start another batch working.

 

 

1. Fuel oil from waste tyre about 40%--45% widely used in below industries:

A. power plant factory,

B. glass factory,

C. cement factory,

D. ceramic factory,

E. aluminum factory,

F. boiler factory,

G. central heating factory,

H. painting factory.

 

2. Carbon black from waste tyre about 30% is used in below industries:

A. electric cable jacketing

B. conveyor belt

C. hose and doormat

D. black nylon bag

E. rubber additives

F. automatic spare parts

G. heat isolation

H. black colorant in rubber materials

I. plastic pipes

J. industries rubber products

K. fire fighting.

 

3. Combustible gas:

About 5% can be recycled and used during process as fuel or collected even compressed into liquid gas, used as fuel or to generate electricity.

 

Profit the 10Tons machine per day brings In india (within 24 hours,  but actually only need 20 hours for a batch)

                         <THE FIRST LINK>

   cost:

Item	Quantity	Unit price(Rupees)	Total price(Rupees)
1.Waste tyre	10T	9000/T	90,000
2.coal	0.4T	8000/T	3200
3.Wage of labor	4 persons	250/person	1000
4.Electric fee	15KW*20hours=300KW	6/KW	1800
Total cost	96000

Benefits(In this case, the rate of crude oil is 45%-50%,the rate of steel wire is about 15%,the rate of carbon black is about 30%,and the rate of tail gas is 5%-10%)(In our machine,the tail gas will be used as fuel.)

Item	Quantity	Unit price(Rupees)	Total price(Rupees)
1.Crude oil	10T*45%=4.5T	30000/T	135000
2.Steel wire	10T*15%=1.5t	11000/T	16500
3.Carbon black	10T*30%=3T	2000/T	6000
Gross profit	157500