Hospital mattress
Anti-bedsore air mattress with fluctuation and air-jetting(with an excreta hole)
Parameters of mattress | |||
Diameter of cells | 9.0cm | Number of cells | 20 |
The 5th-11th cells are over the excreta hole and can be untied | Cells No4 to No13 eject air | ||
Size | 200*90cm | Weight | about 3.2KG |
Load capacity | 135KG | Material | Nylon/PVC,Sky blue |
Parameters of the pump | |||
Air output(lpm) | 8 | Pressure range(kpa) | ≥12 |
Cycle time(minute) | 7 | Time to inflate up (minute) | 25-35 |
Electrical environment | 220V~240V/50Hz,110V~120V/60Hz | Power(W) | 10 |
Dimension | 25*12.5*10cm | Weight | 1.6KG |
Features:
With an excreta hole, make the care work easier
The cells of the mattress fluctuate continuously
CPR air escape design: convenient in emergency rescue
Tiny holes jetting: restrain the breed of bacteria
Human design, indication for locations of tiny holes
Inflating alternately in cycle by two pipes, more powerful
Adjust the pressure manually to a comfortable degree
Two exterior fuses: ensure the safety and convenient to repair
Exterior filter: more stable quality, convenient to repair
The power is not more than 10W,energy saving
Low noise design, not more than 40DB
Three main principles
1. Disperse pressure
When the pressure is more than 32mmHg, arteries and veins can not exchange Oxygen in time, which leads to the dead of cells and bedsore.
The Cell structure enlarges the pressed area, reducing the pressure to less than 30mmHg,Which prevents bedsore effectively.
2. Pressure points changes continuously
3. Air jets from the tiny holes on the surface
Air pump
YA-MA04 Air mattress Hospital mattress