IP Phone with POE+PSTN
1. POE supported
2. Auto provision
3. 5 SIP accounts and 3 way conference
IP Phone withPOE, PSTN port function
Model: MSQ-2006
MSQ VoIP Phone Series are feature-rich, cost-effective SIP phones specially designed for ITSPs, small to medium businesses and residential application. It supports 3 user accounts, auto-provision as well as zero configuration and easy maintenance. It offers high quality audio, a broad range of voice codes and phone features to general level users. Due toits excellent cost-performance ratio and high performance, it is absolutely a good choice for you.
Two RJ45 ports with router built-in, one for internet, one for PCOne RJ11 port PSTN(FXO) PortPOE (Power over Ethernet)
1. Selling points
IP Phone with POE, PSTN port function
Dual mode: VOIP+PSTNSIP ProtocolPOE (Power over Ethernet) IP-PBX Support140 Group Phonebook recordSpeed Dialing3 Way ProtocolCall ForwardWEB ManagementVPN SecurityAuto Provision
2. Technical Specification
IP Phone with POE, PSTN port function
| Network Protocol | SIP v1(RFC2543), v2(RFC3261) IP/TCP/UDP/RTP/RTCP IP/ICMP/ARP/RARP/SNTP TFTP Client /DHCP Client /PPPoE Client Telnet/HTTP Server DNS Client NAT |
| SIP Server | Registrar Server: 5 SIP user accounts Outbound Proxy mode Power over Ethernet |
| Codec | G.711 G.723.1/iLBC G.726 G.729A G.729B adds VAD, CNG to G.729 |
| Configuration | Web Browser Console/Telnet IVR/Keypad Auto-provision |
| IP Assignment | Static IP DHCP PPPoE |
| NAT Traversal | STUN |
| QoS | ToS field |
| Dial Method | Direct IP call without SIP proxy Dial number via SIP server Dial URL via SIP server |
| DTMF Function | In-Band DTMF Out-of-Band DTMF SIP Info |
| Phone Features | Caller ID Call Hold Call Waiting Call Forward Speaker Phone 3-way Conference Redial and Flash Speed Dial Phone Book Volume Adjustment Ring Tone Selection |
| Voice Quality | VAD CNG LEC Packet Loss Compensation Adaptive Jitter Buffer |
| Firmware Upgrade | TFTP Console HTTP Auto-provision |
| Security | HTTP 1.1 basic/digest authentication for Web setup MD5 for SIP authentication (RFC 2069/RFC 2617) |
| Interface | Power Input: 100-240VAC, Output Power: DC-5.5V,1A WAN RJ45,10/100M port LAN/PC RJ45,10/100M port TEL IN (FXO) RJ11 port |
3. Product Photo
IP Phone withPOE, PSTN port function
