Ads by Google
•SPECIFICATIONS
1.material:stainless steel
2.measure range:4" / 100mm
3.package:plasic box or according to your requirements
4.caliper length:17 cm
•Technical specifications:
1.Outside Jaws: Measure External Length
2.Inside Jaws: Measure Internal Length
3.Measuring Range: 0-100mm/0-4in,
4.Resolution: 0.01mm/ 0.0005in
5.Accuracy: ± 0.02mm/ 0.001in (<100mm)
±0.03mm/0.001in(>100-200mm)
6.Repeatability: 0.01mm / 0.0005in
7.Max Measuring Speed: 1.5m/sec, 60in/sec
8.Measuring System: Linear Capacitance measuring system
9.Display: LCD Screen
10.Construction Material: Stainless Steel
11.Power: One alkaline lithium button cell battery 1.5v,TYPE LR44.
Capacity-180MAH
12.Working Temperature: 5°c-40°c/41 to 104 degree F
13.Note: Accuracy affected in environments exceeding 80% relative humidity.
•APPLICATIONS
1.Operation : slider can be removed only after the locking screw (#10) is loosened.
2.Basic measuring methods :
1) loosen the locking screw
2) Press "ON " button, select sae or metric measurement by pressing "MM/INCH" button.
Pressing "MM/INCH" button after measurement will display the sae / metric conversion.
3)To reset display to zero, close external measuring jaws, then press "ZERO" button.
Falure | Cause | Measure |
Display flashes | Low battery | Replace battery |
Display does not change when slider is moved | System locked | Remove battery and replace after 30 seconds to reset system |
Accuracy less than +/-0.001mm | Dirt in the sensor | Remove slider cover and its assembly, clean with compress air 5kgs/cm2 |
No display on LCD | 1.improper battery position 2. Low battery | 1. Remove battery cover and check battery position 2. Replace battery. |