150mm Digital Vernier Caliper
1. Has finely honed jaws for exacting inside, outside and depth measurements 2.Measures both ID and OD in inches and millimeters
3.With accuracy to 1/20 mm and 1/128"
4.Slide and lock included; comes in a protective wood box
5.Total length: 9 1/4"
6.Maximum Opening: 6"(150mm)
Falure | Cause | Measure |
Display flashes | Low battery | Replace battery |
Display does not change when slider is moved | System locked | Remove battery and replace after 30 seconds to reset system |
Accuracy less than +/-0.001mm | Dirt in the sensor | Remove slider cover and its assembly, clean with compress air 5kgs/cm2 |
No display on LCD | 1.improper battery position 2. Low battery | 1. Remove battery cover and check battery position 2. Replace battery. |
•APPLICATIONS
1.Operation : slider can be removed only after the locking screw (#10) is loosened.
2.Basic measuring methods :
1) loosen the locking screw
2) Press "ON " button, select sae or metric measurement by pressing "MM/INCH" button.
Pressing "MM/INCH" button after measurement will display the sae / metric conversion.
3)To reset display to zero, close external measuring jaws, then press "ZERO" button.
150mm Digital Vernier Caliper