pneumatic control valve ISO9001:2008 approved Max Flow:100L/min Max pressure:315bar Working sections:1~12,Threads:G3/4"

pneumatic control valve

Main technical data for DCV100 series sectional control valve as follows:

1.Nominal.Flow:80L/min(=21.13GPM=21.13U.S.gal)

2.Max.Flow:100L/min(=26.42GPM=26.42U.S.gal)

3.Max.Pressure:315bar(=4567.5psi=31.5Mpa)

4.Thread(standard):G3/4”(we normally provide with BSPP thread,other special thread on require)

5.Working sections:1 to 12 all be ok

6.Spool stroke:+7~-7mm

7.Tie-rod tightening torque:55+/-5N.m

8.Parallel circuit(other circuit,such as tandem circuit on request)

9.Low internal leakages

10.High strength cast iron body

11.Nickel plated spools

12.100% tested products before shipment

13.ISO 9001:2008 approved

14.Good quality,timely service

15.Factory directly sales

Introduction about QTfluid company and products

QTfluid(Shanghai)Tech.Co., was built in 2001.We specialize in the design,R&D,manufacture and sale of hydraulic valves.Our main products have been divided into two big parts,monoblock valve and sectional valve.

Our main products are as follows

Monoblock directional control valves

Sectional directional control valves

Proportional control valves

Nonstandard hydraulic control valve

Accessories

At present,we could provide 5 series of monoblock valve and 10 series of sectional valve,for each series,we can supply different control style,such as manual control,detent control,pneumatic control,double control,electro hydraulic ON-OFF control,cable remote control,hydraulic control and so on.

Application

Our products are used in construction,agriculture and machinery,special vehicle for environment sanitation,oil equipment,spaceflight and military area.

  

The picture we showed is our sectional control valve of DCV100/4 with pneumatic control.

If there is anything we can help you,please contact with us in time,we will be more than happy to help and support you in any way we can.