Ads by Google
brass ball valve(forged brass ball valve)
working Temperature:-20~180
Nomial Pressure:2.0MPa
Pipe Thread To ISO-22-1:2000
| Component | Material |
| Body | Brass&Zinc |
| Bonnet | Brass&Zinc |
| Ball | Brass&Iron |
| Seat Ring | Teflon&PVC |
| Stem | Brass&Iron |
| Handle | Carbon Steel |
| Nut | Iron |
| Washer | Brass |
| Packing Ring | Teflon&PVC |
Our senior engineers have rich experiences in the capability of mould development,so that ensured us and our parters make a good market
We can produce it under the different serise of weights,and we can aslo make the new mould do OEM for u.We have all kind valve,welcome yr enquiry.
Detail Selling Lead Description
TECHNICAL REQUIREMENT
Before assembling,all parts will be cleaned,no oil or grease.Removed all burrs and sharp edges.
Before connecting,body cap male thread(bonnet)should be coated with sealing glue.
Handle turn or close freely.
After assembling, test by water or air at pressure no less than 0.8MPA.no leakage.
We also producing brass fitting,gate valve,check valve,angle valve,water tap,brass bibcock,brass connector for garden fitting,pipe fitting and so on.
Feature for our brass ball valve:
1.perfect seal,no peeling,no burr
2.surface smooth and clean
3.csat brass body
l
brass mini ball valve