SF UHMWPE fiberRegarded as one of the world's three high performance fibers (carbon fiberaramid fiber and UHMWPE fiber).SF UHMWPE fiber use UHMWPE powder as raw material ,processed by Gel Spinning ,ultra elongation.it makes previous interwining &disorder array big molecule untwist to reach to ultra-high degree of orientation and degree of crystallinity ,so make characteristics as Light weight ,soft, high molecular weight, high degree of orientation and high crystallization.low density, high modulus, UV resistancecorrosion resistance, outstands anti-impact and anti-incision.
High Tenacity15 times over steel and 10 times over normal chemical fiber.
High Modulus just next to superfine carbon fiber..Low Density: with a density of 0.97g/cm3, lower than the water, so it can float on water.
UV resistancecorrosion resistance,acid-resistant ,alkali-proof,salt tolerance
Excellent abrasion resistant, soft ,long Bending life
SF UHMWPE fiberMelting Point:144152, the tenacity and modulus decrease when temperature ascend .however it will change nothing when temperature under 0 .there is no brittle point when -150 .so SF-Y fiber has big avail range of temperature -15070 .also, there is no serious performance drop when shortly expose when 110oC
Code Name | Specification | Density(g/cm3) | Tenacity (g/D) | Modulus (g/D) | Elongation(%) | Application |
SF-Y-1 | 150D×50F | 0.97 | 40±2 | 1400 | 2.8 | High Tenacity Thread |
200D×50F | 0.97 | 40±2 | 1400 | 2.8 | High Tenacity Thread | |
300D×100F | 0.97 | 40±2 | 1400 | 2.8 | High Tenacity Thread | |
400D×160F | 0.97 | 38±2 | 1300 | 3.0 | Cut-resistance gloves | |
600D×200F | 0.97 | 38±2 | 1300 | 3.0 | Cut-resistance gloves | |
SF-Y-2 | 800D×300F | 0.97 | 38±2 | 1300 | 3.2 | Bulletproof Product |
1000D×300F | 0.97 | 38±2 | 1300 | 3.3 | Bulletproof Product | |
1300D×300F | 0.97 | 36±2 | 1200 | 3.5 | Bulletproof Product | |
1500D×320F | 0.97 | 34±2 | 1100 | 3.5 | Bulletproof Product | |
SF-Y-3 | 3200D×600F | 0.97 | 30±2 | 900 | 3.8 | Rope |
UHMWPE fiber