Printing process

 1, print it with a laser printer(hp, epsom,canon,Lexark).

 2, after 1-2 minutes when it dry naturally, cut it.

 3, put it into water. After 30-60s, remove the transfer membrance    0.5cm first from the base paper.

 4, put the 0.5cm picture first onto the surface then pull the base paper away slowly.

 5, clean the bubble under the transfer membrance with the base paper or soft brush. Use the soft cloth or absorbent or absorbent paper to scrape the surface.

6, use a hair drier to make the picter dry, no water.

7, put it in an oven, 100-120 dgree in 30 minutes.