Ads by Google
Brief introduction
The Uniforce inflatable hangar used for all types of fighter planes, helicopters, civil aviation aircraft and all kinds of other aircrafts as the non-permanent shelter. It can be set up within 1~2 hours and without large lifting equipment. It provides the comprehensive and security indoor environment for aircrafts parking, inspection, maintenance etc., so that prevent damage from various bad climate for aircrafts.
Advanced and Advantage
• Alternatives to prefabricated hangars in airports, it can be set up and come into use at anytime and anywhere you need.
• Easy to set up and dismantle, without lifting equipment.
• No special requirement to set-up position.
• Advantages of main material: abrasion-proof, fire-proof, water-proof and light weight .
• Stable overpressure control, well-ventilating, strong anti-wind ability, wide temperature range.
• No special maintenance required.
Composing
• Module
• End door
• Middle door
• Air Pressure control system
• Air supply system
• Repair kit
• Transport boxes
Auxiliary equipments
• Transformer
• Distribution tubes
• Blower unit
• Alarm unit
• Pressure control system
• Monitoring tubes
• Inflatable hangar is equipped with transformer, air supply unit, air pressure control system to ensure normally operating. Especially air pressure control system, can maintain correct pressure inside the hangar, test the pressure and supply air automatically in case of power loss to the unit or too low pressure in the hangar.
Set-up procedure
• Selection and preparation of the set-up area
• Unpacking
• Rolling out of the modules, air beams and canvases
• Lacing of pre-installed slings between modules and end door canvas
• Air Pressure Control system and air supply equipments connecting
• To inflate
• Anchoring the hangar
We could supply various size of large-span inflatable Hangars depending on customer's requirements!
Length: combined with several units
Width: up to 40m
Height: up to 18m
Technology Parameter
Items | Type: MKII 18 | |
1 | External dimension (L×W×H) | 39.2m(with 2 end doors)×18.7m×8.2 m |
2 | Internal dimension (L×W×H) | 24.8m(if without 2 end doors)×15.3m×6.5m |
3 | Width at height of 2m | 14m |
4 | Weight of Hangar | 3600kgs |
5 | Total weight including equipment | 4200kgs |
6 | Hangar components | 4 modules + 1 middles doors + 2 end doors (Can be adjusted according to the demands) |
7 | Components weight | Each module: 600kg Each end door: 500kg |
8 | Transportation packing and dimension of individual box | 6 boxes, 500-700kg each box 2m×1.4m×1.5m |
9 | Time for setting up | 6 men in 2 hours |
10 | Blower quantity for setting up | 2 sets |
11 | Air control | Air pressure control system operates in 2 hours interval, 1 set air pressure control system |
12 | Mode to elevate the end door | Manual or mechanical |
13 | Suitable temperature | -30°C~+70°C |
14 | Anti-wind ability | against 8 degree (25 m/s) wind speed |
15 | Snow load ability | around 100kg/m2 thickness of snow cover can be withstand |
16 | Years of continuous use | 5 years |
17 | Storage life | 10 years |