Ads by Google
| ISO Code | Grade | Physical & mechanical properties | Applications recommended | ||
| Density g/cm3 | HardnessHRA(HV) | TRSMpa | |||
| K05 | YG3 | 15.0 | 90.5 | 1300 | Suitable for finishing of castiron and nonferrou metal |
| K10 | YG6X YG6A | 14.8 14.7 | 91.0 91.5 | 1560 1510 | The finishing & semi-finishing of castiron and nonferrous metals and also for the machining of manganese steel and hardening steel |
| K15 | YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing of castiron and light alloys and also for the milling of cast iron and low-alloysteel |
| K20 | YG8 | 14.6 | 989.0 | 1840 | |
| M10 | YW1 | 13.0 | 91.0 | 1290 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel |
| M20 | YW2 | 12.9 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs |
| P10 | YT15 | 11.3 | 91.0 | 1300 | Suitable for finishing and semi-finishing of steel and cast steel with a moderate feed rate and a rather high cutting speed |
| P20 | YT14 YS25 | 11.4 13.0 | 90.5 80.5 | 1400 1780 | Suitable for finishing and semi-finishing of steel and cast steel YS25 is specially used for the milling of steel and cast steel |
| P30 | YT5 | 12.8 | 89.5 | 1560 | Suitable for the heavy duty rough turning of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions |
| K05-K10M20 | JP10 | 14.0 | 92.5 | 1600 | suitable for fine and semi-finishing machining of chilled cast iron and non ferrous metal with good performances of the moseetting and wear resistance,also suitable for turning and milling ofcast iron and low steel |
| K20 | JK201 | 14.9 | 91.0 | 1800 | Suitable for semi-finishing and the roughing of cast iron and light alloys and also for the milling of cast iron and low alloy steel |
| M05-M10 | YS8 | 13.9 | 92.5 | 1720 | It can be used for the finshing of iron based high-temperrature alloys and high strength steel and it can also be used for the finshing of chilledcast iron ,heat resistant stainless steel .high manganese steel and bar dened steel |
| P30 | JP301 | 12.9 | 90.0 | 1600 | used for the milling of steel ,cast steel and alloy steel . |
| P35-P40 | YC40 | 12.9 | 91.0 | 2200 | Suitable for the heavy duty turning of steel and cast steel with a big feed rate under unfavorable working condition |
| P40 | YM40 YC45 | 12.75 12.75 | 90.0 90.0 | 2100 2300 | Suitable for the heavy duty turning of steel and cast steel with a big steel rate and also for face milling |
Tungsten Carbide Inserts