RF transmitter and receiver 1.time lapse 2.1 to 99 seconds or minutes 3.12V,220V 4. visiable adjust freely

Model No.: DL-CS2015LT

Description: freely time adjust RF transmitter and receiver  

  

1. Product Detail:

DL-CS2015LT is a 2CH RF Wireless intelligent Remote Control Switch with time lapse (1 second to 99 seconds or 1 minute to 99 minutes adjustable seperately) function at momentary control mode. It is widely used in electrical operated gate, window, crane devices, barrier, lifter, industrial control and security industry etc (especially for the switch over from wire garage, window and anti-theft system to wireless one).

 

2. Technical specification:

 

	Description	Parameter
1	Operating Voltage	12V/24V DC
2	Control voltage and current:	7A 240VAC | 10A 24VDC
3	Static Current	=< 6mA
4	Frequency	433 MHz
5	Sensitivity	>= -105 dB
6	Output voltage	Optional DC / AC
7	Operating Temperature	-40 to 80 deg C
8	Decode IC	MCU(decode  learning code)
9	Time lapse	1 second to 99 seconds or 1 minute to 99 minutes adjustable
10	Dimension (w, h, d)	PCB: 84*73*24MM Case: 100*80*28mm
11	G.W.(include case)	130g

 

 

 

 

 

 

 

 

 

3. Procedure to Learn and Erase Codes

    a)  Keep pressing the learn button until the led blink and extinguish, which indicates previous learned codes have been erased.

    b)  After erasing the code, the led will flash slowly, press the “Learn” button on the receiver board when the led is off, keep pressing until the led is on, then release, indicating the receiver is ready and waiting to learn from transmitter.

    c)  Press the remote, the led will blink, that means the code has been learnt..

4. Operating details:

Output Mode selection.

	J2	J1	Output Mode
i	Open	short	Toggle
ii	open	open	Momentary
iii	short	Open	Interlock

5. Wiring diagram:

 

 

DL-CS2015LT freely time adjust RF transmitter and receiver