Ads by Google
Guardrail roll forming machine
Description
Guardrail roll forming machine produce W beam guardrail and thrice guardrail in one machine as customer required. This line is cassette type which will share one machine base for W Beam and Thrice Beam. The whole line mainly consists of 7.5 ton double-cone uncoiler and its base, sheet guiding equipment, sheet leveling equipment, pre-punching equipment, pre-cutting equipment, guardrail forming system, post hydraulic cutting m equipment, automatic stacker, hydraulic and controlling system. It can continuous form the steel sheet according to customers requirement, automatically cut to length, PLC controlled, alternating Current Frequency Conversion.
Technical Parameters
NO | Item | Parameters. | Remark | |
1
| Suitable material | Type | Hot-Rolled Steel |
|
Thickness (mm) | 3.0-4.0mm |
| ||
Yield Strength (Mpa) | 235Mpa |
| ||
Coil Width (mm) | 482/748mm | 482mm/W Beam, 748mm/Thrice Beam | ||
2 | Forming Speed (m/min) | Variable 20m/min | Not including cutting and punching time | |
3 | Total power | 87KW | Up to final confirmation | |
4 | Power | AC380V,50Hz,3 Phase | Up to final confirmation | |
5 | Dimension (L×W×H, m) | 23×7×1.5 | Up to final confirmation | |
6 | Roller Material | D2 Steel | Mould Steel | |
7 | Shaft Material | 45# Steel | ||
8 | Total Weight | 55 Ton | Up to final confirmation | |
9 | Required Operator | 3 workers | ||
we can design and manufacture different machines according to customer's requirement.Pls send us the profiles drawing.