1. Temp. Range: Amb.+5C to 150C 2. Time Range: 99h59min 3. Temp. Discrepancy: plus-minus 0.5C 4. Display discrepancy: 0.1C

Sample Concentrator-ND100-2

 

 

The ND100 consists of a base and stand assembly, sample holder and gas distribution system. Test tubes are held in a block . The gas at 5 to 10 psig passes through the distribution manifold. Depending on the test-tube size and solvent volume they can be individually raised or lowered to the correct height. Needles or glass pipets blow gas onto the surface of the solution resulting in rapid evaporation of the solvent. All materials used are laboratory quality and can withstand contact with organic solvents. Acid resistant models are available for corrosive application

 

Features

1. High precision and wide range of temp control

2. Blowing a large number of samples at one time

3. Blowing each sample independently

4. Amount of airflow can be adjusted

5. Easy operation; safe and reliable to use

 

Specification

1. Temp. Range: Amb.+5°C~150°C

2. Time Range: 99h59min

3. Temp. Discrepancy: ≤±0.5°C

4. Display discrepancy: 0.1°C

5. Heating Time: ≤30min ( from 40°C  to 150°C)

6. Temp. Discrepancy @100°C: ≤±0.5°C

7. Temp. Discrepancy @150°C: ≤±1°C

8. Max. Gas pressure: 0.02Mpa(using needles ≤16)

                                      0.05Mpa(using needles ≥16)

9. Nitrogen Consumption: 15L/min

10. Needle Length:150mm

11. Dimensions(mm): 230X225X450

12. Weight(kg): 7.5kg

 

Insert Blocks

 

Type	Parameter	Capacity	Dimensions(mm)
MD01	6mm	48	95.5*76.5.50
MD02	7mm	48	95.5*76.5.50
MD03	10mm	24	95.5*76.5.50
MD04	12mm	24	95.5*76.5.50
MD05	13mm	24	95.5*76.5.50
MD06	15mm	12	95.5*76.5.50
MD07	16mm	12	95.5*76.5.50
MD08	19mm	12	95.5*76.5.50
MD09	20mm	8	95.5*76.5.50
MD10	26mm	8	95.5*76.5.50
MD11	28mm	4	95.5*76.5.50
MD12	40mm	3	95.5*76.5.50
MD13	0.2ml	48	95.5*76.5.50
MD14	0.5ml	48	95.5*76.5.50
MD15	1.5ml	24	95.5*76.5.50
MD16	2.0ml	24	95.5*76.5.50
MD17	0.2ml	96	153*76.5*50
MD18	16mm	12	95.5*76.5.50
MD19	15mm	12	95.5*76.5.50

Sample Concentrator