It can locate the trace of the cable or metallic pipeline, it can also measure the depth of the underground cables or pipes.  Specification:

Transmitter:

Output:Direct connection outputClamp coupling outputRadiation outputOutput frequency:Pipe tracing frequency: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz. Here 500Hz and 1kHz are complex frequency.Fault locating:

8Hz very low complex frequency.

Output power:For 500Hz, 1kHz, 8kHz, 33kHz, and fault locating frequency, the power consumption is max. 10W, four steps adjustable (2.5W, 5 W, 7.5 W and 10 W).For 66kHz and 93kHz, the power consumption is 1W.Output voltage:

Max. 200V, it can be adjusted according to the load.

Impedance matching:

Fully automatic.

Overload and short protection:

Fully automatic.

HMI:

128×64 dots LCD.

Internal battery:

Lithium cell battery, 14.8V,7Ah.

External power supply:Rated voltage 12VDCCigar lighter of car outputCharger:

Input: AC100~240V, 50/60Hz;

Output: DC16.8V, 2A.

Working condition:Temperature: -10°C-+40°CHumidity: 5-90%RHAltitude: <4500mDimension(mm):

275×220×100 for the main unit.

Weight:

2.4kg for the main unit.

Receiver:

Signal input:Internal receiving loopClamp1kHz Mini Sensor8kHz Mini SensorA Frame supportReceiving frequency:Active detection frequency for Pipes:

500Hz, 1kHz, 8kHz, 33kHz, 66kHz, and 93kHz.

Passive detection frequency for Pipes:

Power frequency

Radio frequency (RF).

Clamp identification frequency:

500Hz complex frequency.

Clamp current measurement frequency:

500Hz, 1kHz, 8kHz

Mini sensor identification frequency:

1kHz, 8kHz

Grounding fault locating frequency:

8Hz complex frequency

Pipe detection mode:Intelligent Peak Method (Wide): Suitable for active detection.Peak Method:

Suitable for passive detection.

Narrow Method.Null Method.Cable Identification mode:Clamp intelligent identification.Clamp current measurement.Mini sensor identification.Human-machine Interface:

320×240 LCD

Internal battery:

Lithium cell battery, 7.4V, 7Ah.

Charger:

Input: AC100~240V, 50/60Hz

Output: DC 8.4V, 2A/3A.

Dimensions (w x h x d):

700mm×270mm×120mm (main unit)

Weight:

3.5kg (main unit)

Working condition:Temperature: -10°C-+40°CHumidity: 5-90%RHAltitude: <4500m