1. Can charge,test ,repair laptop battery 2. 1 year warranty 3. CE&ROHS

For Acer  laptop battery tester 

1.Basic Parameters

Dimensions	201 x 99 x 35 mm
Weight	333g
Adapter Input	AC 100 ~ 240 V
Adapter  Output	DC 19V 4.74A
Display mode	Segment LCD with white backlight + LED in red and green
Charging mode	Constant current + constant voltage
Maximum charging current of each channel	2.5A
Standby power consumption	≤1W
Working temperature	0~40°C        20%-90% RH (Non condensation)
Storage temperature	-20°C~65°C 10%-95% RH (Non condensation)
Maximum charging time	8 hours

2.Features

RFNT2 is a battery testing device with two channels, having the features below:

1.Supporting two intelligent batteries at once:

2.With charge and test functions

3.LCD for displaying battery information

4.LED for indicating working status

5.Pre-charge, fast charge and constant voltage charge for charging stages

6.With a USB port for connecting with computers, master machine can monitoring and control slave machine

3.Function Introduction1)ChargeTwo channels can work independently and serve two intelligent batteries separately. Active, pre-charge, constant current and constant voltage are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries.2)TestTesting time is 30seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result.

Normal:              Test           OK            Shown on LCD

Abnormal:            Test           NG            Shown on LCD

Possible causes and solutions for the abnormal:

1)   Cause: battery voltage is too low to discharge

       Solution: try to charge the battery to raise voltage

2)   Cause: remaining capacity is too full to charge any more

      Solution: try to discharge the battery to reduce the remaining capacity

3)  Bad contact of battery connecting wires

4)  Damaged battery

5) Tester trouble

3)Online FunctionsTester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine.4)Monitoring

Battery information can be monitored via three windows.

1,Home screen

Battery bar and brief information can be read on home screen.

2.Battery detail information window

Show smart battery data in real time and the data can be saved and printed in image format.

3.Battery graph window

Voltage, current and capacity are traced in curves.

5)Control

Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands.

6)Parameters

Users can set working parameters via set parameter window in Battery Manager.

7)Others1.Active cooling2.Active batteries of zero voltage

When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery.

Battery identification

Battery information can be read from battery management chip after establishing communication.

Intelligent protection

Against over-current, over-voltage, over-charge, over-heat and short circuit.

Suitable for almost all laptop batteries, above 95%4.StructureAccessories1).1 x adapter2). 1 x USB cord3). 1 x CD4). 14 x connectors5). 10 x cables

6). 10 x jumpers

Different connectors for defferent model of laptop battery:

package:

Acer Laptop Battery Tester