Network Cable Tester 1.With RJ45/RJ12/RJ11/BNC,USB Port 2.Easily used,convenient

1. Introduction

The 4 in 1 Cable Tester tests 4 common LAN and Computer cables. It tests installed cables or patch cords with RJ-45,RJ-11,1394,USB ,and BNC connectors. It is intended to test cables with straight through connections not cables with reversed or transposed connections like some LAN crossover cables or reverse wired  telephone cables.

2.:PRODUCT FEATURES2.1 Test 5 types of cables2.2 Simple one button test2.3 Ergonomic portable handheld design2.4 Tests installed wiring or patch cables2.5 Remote unit stores in Main unit2.6 600 ft test distance (RJ-45/RJ-11/BNC2.7 Convenient battery access2.8 Built in battery access2.9 LEDs indicate connections and faults2.10 Beeper provides audible annunciation of test results2.11 Tests shielded (STP) or unshielded(UTP) LAN cables2.12 Test shields in 1394 and USB cables

3.SPECIFICATIONS

3.1Cables Tested: UTP and STP LAN caTerminated in RJ-45 male connectors.(EIA/TIA 568) RJ-11 cables with male connectors, 2 to 6 conductors installed.1394 Cables with Type 1 plugs on both ends. USB cables with Type A flat plug on one end and type B square Plug on other end. BNC cables with male connectors.

3.2 Faults Indicated: No Connection , Shorts, Opens, crosses.3.3 Low battery Indicator: LED lights to indicate low battery.3.4 Case Dimensions: 7.25×4.0×1.0 inches (L×W×H).3.5 Weight:202 grams,0445Ibs.(Without battery).3.6Battery: 1 standard 9-volt alkaline battery.

4. General Information:the LEDs that should light for a good cable.The 5 in 1 Cable Tester performs its tests when thesingle button on its front panel is pressed and released.6 Status LEDs indicate the condition of the cable beingtested, as well as informing the user that Power is turnedon, and that the battery is good(or bad).8 additional connection LEDs light to indicate that specific wires in acable are connected .A chart beneath the 8 LEDs showsNote: Only one cable can be tested at a time. I.e. A BNCcable and an RJ-45 cable cannot be tested simultaneously.

5. General Information:

The following section provides information to the user about common cable types,common failures, and repairs. It  is not  meant to be anexhaustive study of the topic, just some basic informationthat the uninitiated may find helpful.Main UnitRemoteFemale BNC TerminatorMale/Male BNC jumper cable,(5)Male/Male RJ-11 jumper cable,4 wireMale/Male RJ-45 STP jumper cable,(5),EIA/TIA 5689-Volt BatteryInstruction Manual

 

 

Contact:

 

Name:Dennis     Skype:  dennis.lee661      Website: www.cnnbrising.com

 

Your inquiry will be answered within 24 hours .Wishing to be your long-term partner , please      feel free to contact me ,we will do our best for you,