GENERAL INFORMATION:Transfer 8 E1 signal through fiber
product character: | | |
(1)High integrate design, work stabile, very low failure rate. | (2)E1 port use digital clock resume circuit and digital phase-lock circuit. | 3) Voltage can select -48V/+24V/110V/220V, provide over-voltage and over-current protection, have high electromagnetism shield capability. | (4) Jitter tolerance much better than GB. | (5)Monitor remote equipment through fiber inter-band channel, display remote status on panel LED. | (6)Provide function of 8 E1 remote loop, and 1 interface of phone. | (7)Network manager interface use SNMP or RS485.(8)Two types:Standalone, desktop, 19inch;Card,usually be inserted in our rack 19 inch. |
|
optical interface parameter: | | |
optical wavelength: 850/1310nm for multi-mode fiber, 1310/1550nm for single-mode fiber.optical interface: SC/FCtransceiver module: > -6dBmoptical receiver sensitivity: <-36(BER<10)receive range: >-30dBtransmission distance: multi-mode 2 Km, single-mode 40 Km, single-mode 80 Km,single-mode 120 Km.Jitter tolerance : according with G.742 and G.823. |
|
E1 interface parameter: | | |
Interface Rate: 2.048Mbps+-50ppmCoding: HDB3Interface standard: ITU-T G.703interface Impedance : 75Ω(unbalance) and 120Ω(balance).interface character: support rack (19 inch, 6u high) up to 24 directions |
|