Non-slip Heat Shrinkable Tube 1.Shrinking ratio:2:1 2.Non-slip shrink sleeve 3.X-pattern sleeve 4.Flexible protection sleeve

Non-slip Heat Shrinkable Tube1.Shrinking ratio:2:12.Non-slip shrink sleeve3.X-pattern sleeve4.Flexible protection sleeve

Non-slip Heat Shrinkable Tube is a kind of high polymer alloy produced by adopting high grade polymer, scientific material component allocations and mechanical mixture. It has undergone the process of extrusion and molding, cross-link through electronic accelerator and surface treatment after expansion. The product boasts the advantages of environment-friendliness, good flexibility, skidproof, good appearance, fast shrinkage and stable performance. It is used in protect with tripod, unipod. Also used in fishing rods, sports fittings, health equipment and commodities, etc.

Main Property: 1) Operating Temperature: -55 ~ 105 °c.

2) Shrinking Temperature: Start at 70 °c, and shrunk totally at 105 or 110 °c.

3) Shrinking ratio:2:1,longitudinal Shrinking ratio: below 8%;

4) Tensile Strength: 10.4Mpa; Elongatin: 200%;

5) Good flexibility, skidproof, good appearance and fast shrinkage;

6) Convenient: Can be shrunk by oven, heat gun, hair drier or hot water easily;

7) Color: Black ,Red,Yellow,Green,Blue. (other colors are also available upon request).

Specification:

Size(mm)	As Supplied (mm)		After Recovered(mm)		Standard Packing(M/piece)
	Original    I. D.	Average Thickness	Max    I. D.	Wall Thickness
Φ 10	≥ 10	0.45± 0.15	5.5	0.85± 0.15	0.2/1.0
Φ 15	≥ 15	0.45± 0.15	8.0	0.85± 0.15	1.0
Φ 20	≥ 20	0.50± 0.15	11.0	0.90± 0.15	0.8/1.0
Φ 22	≥ 22	0.50± 0.15	12.5	0.90± 0.15	0.8/1.0
Φ 25	≥ 25	0.50± 0.15	14.5	1.00± 0.15	0.8/1.0
Φ 28	≥ 28	0.50± 0.15	15.5	1.00± 0.15	0.8/1.0
Φ 30	≥ 30	0.60± 0.15	17.5	1.20± 0.15	1.0
Φ 35	≥ 35	0.60± 0.15	20.0	1.20± 0.15	1.0
Φ 40	≥ 40	0.60± 0.15	23.0	1.20± 0.15	1.0
Φ 45	≥ 45	0.65± 0.15	25.0	1.20± 0.15	1.0
Φ 50	≥ 50	0.65± 0.15	28.0	1.20± 0.15	1.0

Non-slip Heat Shrinkable Tube